49637
1-Methyl-3-propylimidazolium iodide
≥98.0% (HPLC)
Sinonimo/i:
MPII
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
About This Item
Formula empirica (notazione di Hill):
C7H13IN2
Numero CAS:
Peso molecolare:
252.10
Numero MDL:
Codice UNSPSC:
12352100
ID PubChem:
NACRES:
NA.22
Prodotti consigliati
Livello qualitativo
Saggio
≥98.0% (HPLC)
Impurezze
≤0.3% water
≤50 mg/kg chloride and bromide
Stringa SMILE
[I-].CCC[n+]1ccn(C)c1
InChI
1S/C7H13N2.HI/c1-3-4-9-6-5-8(2)7-9;/h5-7H,3-4H2,1-2H3;1H/q+1;/p-1
IVCMUVGRRDWTDK-UHFFFAOYSA-M
Descrizione generale
1-Methyl-3-propylimidazolium iodide can be prepared by reacting 1-methylimidazole and propyl iodide.
Applicazioni
MPII in combination with poly(vinylidenefluoride-co-hexafluoropropylene) (PVDF-HFP) forms an ionic liquid polymer gel electolyte, which can be used in dye-sensitized nanocrystalline titanium dioxide (TiO2) solar cells.
Non-aqueous electrolyte for dye-sensitized solar cells.
Codice della classe di stoccaggio
10 - Combustible liquids
Classe di pericolosità dell'acqua (WGK)
WGK 3
Punto d’infiammabilità (°F)
Not applicable
Punto d’infiammabilità (°C)
Not applicable
Dispositivi di protezione individuale
Eyeshields, Gloves
Scegli una delle versioni più recenti:
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
I clienti hanno visto anche
Thomas Stergiopoulos et al.
Nanoscale research letters, 6(1), 307-307 (2011-06-30)
The presence of specific chemical additives in the redox electrolyte results in an efficient increase of the photovoltaic performance of dye-sensitized solar cells (DSCs). The most effective additives are 4-tert-butylpyridine (TBP), N-methylbenzimidazole (NMBI) and guanidinium thiocyanate (GuNCS) that are adsorbed
Mark W Kryman et al.
Langmuir : the ACS journal of surfaces and colloids, 32(6), 1521-1532 (2016-01-23)
A library of six selenorhodamine dyes (4-Se-9-Se) were synthesized, characterized, and evaluated as photosensitizers of TiO2 in dye-sensitized solar cells (DSSCs). The dyes were constructed around either a bis(julolidyl)- or bis(half-julolidyl)-modified selenoxanthylium core functionalized at the 9-position with a thienyl
Influence of various cations on redox behavior of I- and I 3- and comparison between KI complex with 18-crown-6 and 1, 2-dimethyl-3-propylimidazolium iodide in dye-sensitized solar cells.
Shi C, et al.
Electrochimica Acta, 50(13), 2597-2602 (2005)
High efficiency dye-sensitized nanocrystalline solar cells based on ionic liquid polymer gel electrolyte.
Wang P, et al.
Chemical Communications (Cambridge, England), 24, 2972-2973 (2002)
Peng Wang et al.
Chemical communications (Cambridge, England), (24), 2972-2973 (2003-01-23)
An ionic liquid polymer gel containing 1-methyl-3-propylimidazolium iodide (MPII) and poly(vinylidenefluoride-co-hexafluoropropylene) (PVDF-HFP) has been employed as quasi-solid-state electrolyte in dye-sensitized nanocrystalline TiO2 solar cells with an overall conversion efficiency of 5.3% at AM 1.5 illumination.
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.