Direkt zum Inhalt
Merck

Aluminum involvement in the progression of Alzheimer's disease.

Journal of Alzheimer's disease : JAD (2013-02-06)
J R Walton
ZUSAMMENFASSUNG

The neuroanatomic specificity with which Alzheimer's disease (AD) progresses could provide clues to AD etiopathology. Magnetic resonance imaging studies of AD clinical progression have confirmed general conclusions from earlier studies of AD neuropathological progression wherein neurofibrillary tangle pathology was observed to spread along a well-defined sequence of corticocortical and corticosubcortical connections, preferentially affecting certain cell types, while sparing others. Identical and non-identical twin studies have consistently shown AD has mixed (environmental and genetic) etiopathogenesis. The decades-long prodromal phase over which AD develops suggests slow but progressive accumulation of a toxic or infective agent over time. Major environmental candidates are reviewed to assess which best fits the profile of an agent that slowly accrues in susceptible cell types of AD-vulnerable brain regions to toxic levels by old age, giving rise to AD neuropathology without rapid neuronal lysis. Chronic aluminum neurotoxicity best matches this profile. Many humans routinely ingest aluminum salts as additives contained in processed foods and alum-treated drinking water. The physical properties of aluminum and ferric iron ions are similar, allowing aluminum to use mechanisms evolved for iron to enter vulnerable neurons involved in AD progression, accumulate in those neurons, and cause neurofibrillary damage. The genetic component of AD etiopathogenesis apparently involves a susceptibility gene, yet to be identified, that increases aluminum absorption because AD and Down syndrome patients have higher than normal plasma, and brain, aluminum levels. This review describes evidence for aluminum involvement in AD neuropathology and the clinical progression of sporadic AD.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Aluminium, powder, ≥91% (complexometric)
Sigma-Aldrich
Aluminium, wire, diam. 1.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminium, granular, <1 mm, 99.7% trace metals basis
Sigma-Aldrich
Aluminium, foil, thickness 0.25 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminium, ReagentPlus®, beads, 5-15 mm, 99.9% trace metals basis
Sigma-Aldrich
Aluminium, pellets, 3-12 mm, 99.99% trace metals basis
Sigma-Aldrich
Aluminium, foil, thickness 0.45-0.55 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminium, ACS reagent, 99%, wire, wire diam. ~1.5 mm
Sigma-Aldrich
Aluminium, foil, thickness 0.13 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Aluminium, wire, diam. 0.58 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Aluminium, foil, thickness 8 μm, 99% trace metals basis
Aluminium, rod, 1000mm, diameter 12.7mm, 99%
Sigma-Aldrich
Aluminium, foil, thickness 1.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminium, pellets, 3-8 mesh, ≥99.999% trace metals basis
Sigma-Aldrich
Aluminium, evaporation slug, diam. × L 6.3 mm × 6.3 mm, 99.999% trace metals basis
Aluminium, sphere, 100pcs, diameter 1.0mm, aluminum alloy 2017 precision sphere, grade 200, 95.2%
Aluminium, foam, 150x150mm, thickness 30mm, bulk density 0.2g/cm3, porosity 0.93, aluminum 6101 grade, 98.5%
Aluminium, foam, 150x150mm, thickness 3.2mm, bulk density 0.2g/cm3, porosity 0.93, 16 pores/cm, aluminum 6101 grade, 98.5%
Aluminium, mesh, 150x150mm, nominal aperture 0.38mm, wire diameter 0.25mm, 40x40 wires/inch, open area 37%, plain weave mesh
Aluminium, rod, 200mm, diameter 12.7mm, 99%
Aluminium, tube, 200mm, outside diameter 3.0mm, inside diameter 1.62mm, wall thickness 0.69mm, hard, 99.5%
Aluminium, rod, 100mm, diameter 12.7mm, 99%
Aluminium, honeycomb, 300x300mm, thickness 10mm, cell size 3.2mm, cell wall 0.025mm, core density 0g/cm3, phenolic adhesive (resin), 99.5%
Aluminium, rod, 1000mm, diameter 5.0mm, as drawn, 99.999%
Aluminium, sphere, 100pcs, diameter 3.0mm, aluminum alloy 2017 precision sphere, grade 200, 95.2%
Aluminium, sphere, 100pcs, diameter 6.0mm, 99%
Aluminium, tube, 500mm, outside diameter 1.42mm, inside diameter 1.166mm, wall thickness 0.127mm, as drawn, 99.5%
Aluminium, rod, 50mm, diameter 28mm, as drawn, 99.999%
Aluminium, wire reel, 10m, diameter 0.25mm, as drawn, 99.95+%
Aluminium, honeycomb, 600x600mm, thickness 26.5mm, cell size 6.3mm, cell wall 0.064mm, core density 0.083g/cm3, phenolic adhesive (resin), facing skin carbon fiber / epoxy, 99.9%