Aluminum adjuvant dose guidelines in vaccine formulation for preclinical evaluations.

Aluminum adjuvant dose guidelines in vaccine formulation for preclinical evaluations.

Journal of pharmaceutical sciences (2011-09-16)

Simone Vecchi, Simone Bufali, David A G Skibinski, Derek T O'Hagan, Manmohan Singh

PMID21918987

ZUSAMMENFASSUNG

Aluminum (Al) salt-based adjuvants are present in a large variety of licensed vaccines and their use is widely considered for formulations in clinical trials. Although the regulatory agencies have clearly stated the acceptable levels of Al salts in vaccines for human use, there are no general indications for preclinical research. This brief commentary reviews the current status of Al concentrations in licensed vaccines, the related potential toxicity in preclinical species, and proposes a general guideline for selection of suitable Al salt levels in preclinical models, focusing on the formulation development for recombinant protein antigens. A table with conversion factors is included in order to provide a tool for calculation of doses with different Al salts.

MATERIALIEN

Produktnummer

Marke

Produktbeschreibung

11009

Sigma-Aldrich

Aluminium, powder, ≥91% (complexometric)

266558

Sigma-Aldrich

Aluminium, wire, diam. 1.0 mm, 99.999% trace metals basis

518573

Sigma-Aldrich

Aluminium, granular, <1 mm, 99.7% trace metals basis

326852

Sigma-Aldrich

Aluminium, foil, thickness 0.25 mm, 99.999% trace metals basis

266523

Sigma-Aldrich

Aluminium, ReagentPlus^®, beads, 5-15 mm, 99.9% trace metals basis

338788

Sigma-Aldrich

Aluminium, pellets, 3-12 mm, 99.99% trace metals basis

266574

Sigma-Aldrich

Aluminium, foil, thickness 0.45-0.55 mm, 99.999% trace metals basis

310360

Sigma-Aldrich

Aluminium, ACS reagent, 99%, wire, wire diam. ~1.5 mm

326860

Sigma-Aldrich

Aluminium, foil, thickness 0.13 mm, ≥99.99% trace metals basis

326887

Sigma-Aldrich

Aluminium, wire, diam. 0.58 mm, ≥99.99% trace metals basis

733369

Sigma-Aldrich

Aluminium, foil, thickness 8 μm, 99% trace metals basis

GF44675781

Aluminium, rod, 1000mm, diameter 12.7mm, 99%

266957

Sigma-Aldrich

Aluminium, foil, thickness 1.0 mm, 99.999% trace metals basis

326941

Sigma-Aldrich

Aluminium, pellets, 3-8 mesh, ≥99.999% trace metals basis

433705

Sigma-Aldrich

Aluminium, evaporation slug, diam. × L 6.3 mm × 6.3 mm, 99.999% trace metals basis

GF98718935

Aluminium, sphere, 100pcs, diameter 1.0mm, aluminum alloy 2017 precision sphere, grade 200, 95.2%

GF24569602

Aluminium, foam, 150x150mm, thickness 30mm, bulk density 0.2g/cm³, porosity 0.93, aluminum 6101 grade, 98.5%

GF26812043

Aluminium, foam, 150x150mm, thickness 3.2mm, bulk density 0.2g/cm³, porosity 0.93, 16 pores/cm, aluminum 6101 grade, 98.5%

GF94706354

Aluminium, mesh, 150x150mm, nominal aperture 0.38mm, wire diameter 0.25mm, 40x40 wires/inch, open area 37%, plain weave mesh

GF51598761

Aluminium, rod, 200mm, diameter 12.7mm, 99%

GF29732496

Aluminium, tube, 200mm, outside diameter 3.0mm, inside diameter 1.62mm, wall thickness 0.69mm, hard, 99.5%

GF32029444

Aluminium, rod, 100mm, diameter 12.7mm, 99%

GF51278070

Aluminium, honeycomb, 300x300mm, thickness 10mm, cell size 3.2mm, cell wall 0.025mm, core density 0g/cm³, phenolic adhesive (resin), 99.5%

GF64700524

Aluminium, rod, 1000mm, diameter 5.0mm, as drawn, 99.999%

GF95825403

Aluminium, sphere, 100pcs, diameter 3.0mm, aluminum alloy 2017 precision sphere, grade 200, 95.2%

GF12712610

Aluminium, sphere, 100pcs, diameter 6.0mm, 99%

GF63629219

Aluminium, tube, 500mm, outside diameter 1.42mm, inside diameter 1.166mm, wall thickness 0.127mm, as drawn, 99.5%

GF72634103

Aluminium, rod, 50mm, diameter 28mm, as drawn, 99.999%

GF32182534

Aluminium, wire reel, 10m, diameter 0.25mm, as drawn, 99.95+%

GF96312326

Aluminium, honeycomb, 600x600mm, thickness 26.5mm, cell size 6.3mm, cell wall 0.064mm, core density 0.083g/cm³, phenolic adhesive (resin), facing skin carbon fiber / epoxy, 99.9%