Yes, this product is a successor of Antifoam Y-30 with a pH of approximately 3.
Fortfahren mit
STS0100
Antifoam L-30 Emulsion
aqueous-silicone emulsion
Synonym(e):
Antifoam L-30 Emulsion
zur Ansicht der Organisations- und Vertragspreise.
Größe auswählen
Ansicht ändern
| Ihnen/SKU | Verfügbarkeit | Preis |
|---|---|---|
100 mL | Warenkorb auf Verfügbarkeit prüfen | CHF 56.70 |
250 mL | Warenkorb auf Verfügbarkeit prüfen | CHF 110.00 |
500 mL | Warenkorb auf Verfügbarkeit prüfen | CHF 195.00 |
Über diesen Artikel
NACRES:
NA.21
UNSPSC Code:
12161901
Technischer Dienst
Benötigen Sie Hilfe? Unser Team von erfahrenen Wissenschaftlern ist für Sie da.
Unterstützung erhaltenQuality Segment
contains
emulsifier
General description
Antifoam is also known as defoamer. It is a chemical additive that reduces and hinders the formation of foam in industrial process liquids. It is used to prevent formation of foam or is added to break foam that is already formed.
Packaging
100, 250, 500 mL in poly bottle
Other Notes
A 30% aqueous emulsion
1 of 1
Dieser Artikel | |||
|---|---|---|---|
| Quality Level 200 | Quality Level 200 | Quality Level 200 | Quality Level 200 |
| contains emulsifier | contains - | contains - | contains - |
Lagerklasse
10 - Combustible liquids
Hier finden Sie alle aktuellen Versionen:
Besitzen Sie dieses Produkt bereits?
In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.
-
Is the pH of the 30% emulsion pH3?
1 answer-
Helpful?
-
-
I would like to ask you about 'Antifoam L-30 Emulsion' 1. Is it 'Nonionic surfactant'? 2 Is the product information avaiable for Antifoam L-30 Emulsion. If yes, Please send the link or file for Antifoam L-30 Emulsion.
1 answer-
This product contains proprietary nonionic emulsifiers. Currently, a product datasheet is not available.
Helpful?
-
-
What is the density of this product?
1 answer-
The density of this product is not determined.
Helpful?
-
-
Queston about Antifoam L-30 Emulsion; Does it contain non-ionic emulsifiers? If the product information sheet is available, I would like to get to assess the contents
1 answer-
Antifoam L-30 is a nonionic emulsifier
How To Use
Antifoam L-30 Emulsion works effectively in very low concentrations. One to 100 parts of active silicone per million parts foamer are sufficient to eliminate most foams. Begin trials at higher use levels (50 ppm active silicone), then work down to the level of foam control desired.
The following are parts per million equivalents:
To Yield 50 PPM Antifoam10.9 ounces mixed into 500 gallons
22.0 ounces mixed into 1,000 gallons
55.1 ounces mixed into 2,500 gallons
16.5 quarts mixed into 25,000 gallonsAdding the Antifoam
To produce optimal foam control, it is necessary to have the antifoam completely dispersed in the foaming medium. Follow these steps to achieve complete dispersion:
1. Agitate product prior to use.
2. Predilute with 3 to 10 parts of cool water to aid in dispersion. Add the antifoam to the water with slow mixing. Prediluted material should be used immediately.
If the system can provide adequate agitation to disperse the antifoam, the antifoam emulsion may be added directly without predilution being necessary.
3. Add the diluted antifoam prior to the point where foaming occurs within the system, if possible.This product will freeze at or below 0°C (32°F). If frozen, Antifoam L-30 Emulsion can be thawed and used without loss of efficiency. Agitation may be required. Avoid storage conditions above 49°C (120°F).
Helpful?
-