CR01M0203

Polygard^® CR Kartuschenfilter

pore size 1.0 μm, cartridge nominal length 2 in. (5 cm), Code M (2-118; O-rings)

• Synonym(e): Polygard-CR Cartridge Filter 2 in. 1.0 μm Code M Silicone
• UNSPSC-Code: 23151806
• eCl@ss: 32031690

Eigenschaften

• Materialien: polypropylene ; silicone seal
• Qualitätsniveau: 300
• Leistungsmerkmale: hydrophilic
• Hersteller/Markenname: Polygard
• Parameter: 4.8 bar max. differential pressure (70 psid) at 25 °C; 4.8 bar max. inlet pressure (70 psi) at 25 °C
• Nennlänge Kartusche: 2 in. (5 cm)
• Durchmesser: 7.0 cm (2.75 in.)
• Verunreinigungen: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• Gravimetrisch bestimmte extrahierbare Substanzen: ≤50 mg
• Porengröße: 1.0 μm nominal pore size; 1.0 μm pore size
• Aufnahme: sample type liquid
• Kartuschencode: Code M (2-118; O-rings)

Beschreibung

Allgemeine Beschreibung

The Polygard^® CR Cartridge Filter products are nominally rated filters designed for particle removal applications in liquids and gases. The graded-density depth structure of Polygard-CR filter media provides maximum filtration capacity, a 1.0 μm pore size and the all-polypropylene construction offers low extractables levels and broad chemical compatibility.

Polygard-CR cartridge filters provide high throughput with 4.8 bar max. differential pressure (70 psid) at 25 °C.

Typical Applications
Polygard-CR high-efficiency cartridge filters, composed of graded density polypropylene media are widely used in the beverage industry for liquid and gas filtration applications to protect tighter filters.

Regulatory Compliance
Polygard^® CR Cartridge Filters are designed, developed, and manufactured in accordance with a Quality Management System approved by an accredited registering body to an ISO 9000 Quality Systems Standard and are shipped with a Certificate of Quality. Each cartridge filter is supported by a Validation Guide for compliance with regulatory requirements.

For traceability and easy identification, each filter is marked with identifying characteristics.

Multiple Formats Available
Polygard-CR product line offers a full range of filtration areas is available to suit varying application requirements. A variety of connection options are offered for easy adaptation to existing housings.

These devices have been developed to minimize hold-up volume when evaluating multiple media configurations.

Angaben zur Herstellung

Sanitization Protocol
30 min mit 80 °C heißem Wasser

Sterilization Method
10 Autoklaven- oder In-situ-Dampfsterilisationszyklen von 30 min bei 126 °C

Hinweis zur Analyse

Erfüllt die Anforderungen des USP-Tests auf oxidierbare Substanzen nach Durchspülen mit ≥20 l Wasser

Gravimetric Extractables: after 24-h soak in water

Rechtliche Hinweise

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany