1.50256
Purospher® STAR RP-18 endcapped (5 µm) HPLC Columns
L × I.D. 250 mm x 2 mm LiChroCART™ HPLC cartridge, manuCART™ holder required for use
Synonym(e):
Purospher® STAR RP-18 endcapped (5 µm) LiChroCART™ 250-2
About This Item
Empfohlene Produkte
Produktbezeichnung
Purospher® STAR RP-18 mit Endcapping (5 µm), L × I.D. 250 mm x 2 mm LiChroCART™ HPLC cartridge, manuCART™ holder required for use
Materialien
stainless steel column
Qualitätsniveau
Agentur
suitable for USP L1
Produktlinie
Purospher®
Leistungsmerkmale
endcapped
Verpackung
1 ea of
Kennzeichnungsgrad
17% Carbon loading
Parameter
250 bar pressure
65 °C max. temp.
Methode(n)
HPLC: suitable
LC/MS: suitable
mass spectrometry (MS): suitable (High)
Säule L × ID
25 cm × 2 mm
Oberflächenbereich
330 m2/g
Matrix
fully porous particle
Aktive Matrixgruppe
C18 bonding phase
Partikelgröße
5 μm
Porengröße
120 Å pore size
pH Betriebsbereich
1.5-10.5
Trenntechnik
reversed phase
Lagertemp.
no temp limit
Suchen Sie nach ähnlichen Produkten? Aufrufen Leitfaden zum Produktvergleich
Allgemeine Beschreibung
These columns offer an outstanding stability from pH 1.5 to 10.5 over a wide temperature range, and suitability for up to 100% aqueous mobile phases. Plus, they demonstrate best all-round retention characteristics, as proven by the Tanaka test.
Purospher® STAR RP-18 endcapped, 5 µm LiChroCART™ 250-2 is a cartridge column which requires a manuCART™ cartridge column holder part number 1.51486.0001. The manuCART™ can be used to hold one cartridge column with or without direct integration of a guard column.
LiChroCART™ cartridge columns mounted with a manuCART™ cartridge column holder are hand-tight only and have therefore a maximum pressure stability of 250 bar.
For higher pressure stability requirements Purospher® STAR RP-18 endcapped, 5 µm Hibar® RT 250-2 HPLC columns are available part number 1.50598.0001.
For use under UHPLC conditions (where a pressure stability up to 1000 bar is required) it is recommended to use a Purospher® STAR RP-18 endcapped, 3 µm Hibar® HR 250-2.1 UHPLC Column part number 1.50655.0001
The column dimension of 250 mm length x 2 mm I.D. is the optimal choice for HPLC separation of complex samples at lower flow rate, allowing significant solvent savings and improved sensitivity
Learn more about Purospher® STAR HPLC and UHPLC Columns
Learn more about the Supelco HPLC Column portfolio and Method development:
Brochure: HPLC and UHPLC Column Selection Guide
Brochure: A Practical Guide to HPLC - Method Development Guide
Anwendung
Leistungsmerkmale und Vorteile
- Ultra-pure silica (99.999%) for excellent peak symmetry
- High separation efficiency
- Reproducible results from run-to-run and batch-to-batch
- Best all-round performance according to Tanaka
- Outstanding pH stability from pH 1.5 to 10.5
- No phase collapse when using highly aqueous mobile phases
- Good suitability for LC-MS applications
Hinweis zur Analyse
Theoretische Bodenzahl (N/m) (Hexylbenzol): ≥ 70000
Symmetrie (Hexylbenzol): 0.8 - 1.4
Kapazitätsfaktor (Hexylbenzol): ≥ 8.0
Rechtliche Hinweise
Lagerklassenschlüssel
11 - Combustible Solids
Analysenzertifikate (COA)
Suchen Sie nach Analysenzertifikate (COA), indem Sie die Lot-/Chargennummer des Produkts eingeben. Lot- und Chargennummern sind auf dem Produktetikett hinter den Wörtern ‘Lot’ oder ‘Batch’ (Lot oder Charge) zu finden.
Besitzen Sie dieses Produkt bereits?
In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.
Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..
Setzen Sie sich mit dem technischen Dienst in Verbindung.