Direkt zum Inhalt
Merck
Alle Fotos(1)

Dokumente

267902

Sigma-Aldrich

Titan

wire, diam. 0.81 mm, 99.7% trace metals basis

Anmeldenzur Ansicht organisationsspezifischer und vertraglich vereinbarter Preise
Alle Fotos(1)

About This Item

Empirische Formel (Hill-System):
Ti
CAS-Nummer:
7440-32-6
Molekulargewicht:
47.87
EG-Nummer:
231-142-3
MDL-Nummer:
MFCD00011264
UNSPSC-Code:
12141746
PubChem Substanz-ID:
24856250
NACRES:
NA.23

Qualitätsniveau

100

Assay

99.7% trace metals basis

Form

wire

Selbstzündungstemp.

860 °F

Widerstandsfähigkeit

42.0 μΩ-cm, 20°C

Durchmesser

0.81 mm

bp

3287 °C (lit.)

mp (Schmelzpunkt)

1660 °C (lit.)

Dichte

4.5 g/mL at 25 °C (lit.)

SMILES String

[Ti]

InChI

1S/Ti

InChIKey

RTAQQCXQSZGOHL-UHFFFAOYSA-N

Verwandte Kategorien

Anwendung

Titanium wire may be used as a substrate for the sol gel deposition of solid-phase microextraction fiber.

Menge

23 g = 10 m; 115 g = 50 m

Lagerklassenschlüssel

11 - Combustible Solids

WGK

nwg

Flammpunkt (°F)

Not applicable

Flammpunkt (°C)

Not applicable

Persönliche Schutzausrüstung

Eyeshields, Gloves, type N95 (US)

Analysenzertifikate (COA)

Suchen Sie nach Analysenzertifikate (COA), indem Sie die Lot-/Chargennummer des Produkts eingeben. Lot- und Chargennummern sind auf dem Produktetikett hinter den Wörtern ‘Lot’ oder ‘Batch’ (Lot oder Charge) zu finden.

Besitzen Sie dieses Produkt bereits?

In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.

Die Dokumentenbibliothek aufrufen

Unbreakable solid-phase microextraction fibers obtained by sol? gel deposition on titanium wire.
Azenha MA, et al.
Analytical Chemistry, 78.6, 2071-2074 (2006)
A Kurbad et al.
International journal of computerized dentistry, 16(2), 125-141 (2013-08-13)
This article presents two novel options for lithium-disilicate restorations supported by single-tooth implants. By using a Ti-Base connector, hybrid abutments and hybrid abutment crowns can be fabricated for different implant systems. The latter option in particular is an interesting new
J H Kim et al.
Journal of nanoscience and nanotechnology, 13(7), 4601-4607 (2013-08-02)
Nanocytalline TiN films were deposited on non-alkali glass and Al substrates by reactive DC magnetron sputtering (DCMS) with an electromagnetic field system (EMF). The microstructure and corrosion resistance of the TiN-coated Al substrates were estimated by X-ray diffraction (XRD), scanning
Jiangxue Wang et al.
Journal of nanoscience and nanotechnology, 13(6), 3874-3879 (2013-07-19)
Nanoscale materials (such as TiO2, hydroxyapatite nanoparticles) have gained much concern in the coating of implants for cell adhesion and growth to improve the osteoconductivity. However, due to attrition and corrosion, the wear particles would be generated from the joint
Kwi-Dug Yun et al.
Journal of nanoscience and nanotechnology, 13(6), 3864-3867 (2013-07-19)
This study examined the bone response to titanium dioxide nanotube modified implants. A total of 24 implants were placed in the femur of 4 beagles. Before placement, screw-shaped implants were classified into 3 groups; machined surface (group M), titanium dioxide
Alle zugehörigen Dokumente anzeigen

Artikel

Biomedical Implant Devices Fabricated from Low Young’s Modulus Titanium Alloys Demonstrating High Mechanical Biocompatibility

Biomedical implants are essentially foreign substances within the human body that must survive many years’ exposure to demanding mechanical and physiological conditions. Despite these challenges, metal implants have been widely used to substitute for or rebuild hard tissues such as bones and teeth.

Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..

Setzen Sie sich mit dem technischen Dienst in Verbindung.