Accéder au contenu
Merck
Toutes les photos(2)

Key Documents

View All Documentation

576352

Sigma-Aldrich

Indium tin oxide coated glass slide, rectangular

surface resistivity 70-100 Ω/sq, slide

Synonyme(s) :

ITO, ITO coated slide, rectangular

Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme
Toutes les photos(2)

About This Item

Formule linéaire :
In2O3 · (SnO2)x
Numéro CAS:
50926-11-9
Numéro MDL:
MFCD00171662
Code UNSPSC :
12352103
ID de substance PubChem :
24880854
Nomenclature NACRES :
NA.23

Résistivité superficielle

70-100 Ω/sq

L × l × épaisseur

75 mm × 25 mm × 1.1 mm

Transmittance

>87%

Indice de réfraction

n20/D 1.517 (lit.)

Chaîne SMILES 

O=[Sn]=O.O=[In]O[In]=O

InChI

1S/2In.5O.Sn

Clé InChI

LNNWKAUHKIHCKO-UHFFFAOYSA-N

Vous recherchez des produits similaires ? Visite Guide de comparaison des produits

Description générale

Indium tin oxide (ITO) is widely used as transparent conducting oxides. Its major characteristics are electrical conductivity, optical transparency and the ease to be deposited as films.

Application

ITO cover slides may be used for closed digital microfluidic devices and as a transparent electrodes in display and other optoelectronic devices. Some other potential uses that have been reported are:
  • Eumelanin samples prepared on ITO covered glass substrates.
  • Interface windows of the liquid cell for optical beam deflection (OBD) sensing contain a 20-nm-thick indium tin oxide film.
  • Mesoporous TiO2 films were formed on ITO conductive glass substrates.

Propriétés physiques

Thickness of ITO coating is 150-300 Å.
Resistance may increase to as high as 375 Ω when exposed to temperatures of 300 °C for 30 minutes or more.

To avoid damaging the thin film coating when determining which side is coated, lightly touch the barrelsof the probes to the same surface of a single-side coated product. Testing the alternate side will quicklyshow one with a low resistance as compared to the opposing side, which will exhibit an essentially infiniteresistance.

Code de la classe de stockage

13 - Non Combustible Solids

Classe de danger pour l'eau (WGK)

WGK 3

Point d'éclair (°F)

Not applicable

Point d'éclair (°C)

Not applicable

Équipement de protection individuelle

dust mask type N95 (US), Eyeshields, Gloves

Certificats d'analyse (COA)

Recherchez un Certificats d'analyse (COA) en saisissant le numéro de lot du produit. Les numéros de lot figurent sur l'étiquette du produit après les mots "Lot" ou "Batch".

Déjà en possession de ce produit ?

Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.

Consulter la Bibliothèque de documents

Optical Fiber Refractometers based on Indium Tin Oxide Coatings with Response in the Visible Spectral Region
Zamarreno CR, et al.
Procedia Engineering, 25, 499-502 (2011)
Online coupling of digital microfluidic devices with mass spectrometry detection using an eductor with electrospray ionization.
Baker CA and Roper MG
Analytical Chemistry, 2955-2960 (2012)
Andreas Herrmann et al.
Chemistry (Weinheim an der Bergstrasse, Germany), 15(1), 117-124 (2008-12-17)
Application of an electric field to liquid crystalline film forming imines with negative dielectric anisotropy, such as N-(4-methoxybenzylidene)-4-butylaniline (MBBA, 1), results in the expulsion of compounds that do not participate in the formation of the liquid crystalline phase. Furthermore, amines
Preparation of non-annealed anatase TiO< sub> 2</sub> film on ITO substrate by anodizing in hot phosphate/glycerol electrolyte for dye-sensitized solar cells.
Tsuji E, et al.
Materials Letters, 91, 39-41 (2013)
High-resolution frequency-modulation atomic force microscopy in liquids using electrostatic excitation method.
Umeda K, et al.
Applied Physics Express, 3(6), 065205-065205 (2010)
Afficher tous les articles scientifiques apparentés

Articles

Organic Semiconductor Laser Materials

In this article, we demonstrate that bis-styrylbenzene derivatives show promising characteristics for very low lasing thresholds and discuss the design considerations for organic lasing molecules.

Inverted Organic Photovoltaic Devices Using Zinc Oxide Nanocomposites as Electron Transporting Layer Materials

Organic photovoltaics (OPVs) represent a low-cost, lightweight, and scalable alternative to conventional solar cells. While significant progress has been made in the development of conventional bulk heterojunction cells, new approaches are required to achieve the performance and stability necessary to enable commercially successful OPVs.

Graphene-Based Transparent Conductive Electrodes

A transparent conductive electrode (TCE) is an essential component of various optoelectronic devices such as solar cells, liquid-crystal displays (LCD), light-emitting diodes (LED), and touch screens.

Graphene-Based Transparent Conductive Electrodes

A transparent conductive electrode (TCE) is an essential component of various optoelectronic devices such as solar cells, liquid-crystal displays (LCD), light-emitting diodes (LED), and touch screens.

Afficher tout

Protocoles

Selenium Nanoparticles Applications

Selenium's roles range from essential dietary element to semiconductor in advanced applications like xerography.

Selenium Nanoparticles Applications

Selenium's roles range from essential dietary element to semiconductor in advanced applications like xerography.

Selenium Nanoparticles Applications

Selenium's roles range from essential dietary element to semiconductor in advanced applications like xerography.

Selenium Nanoparticles Applications

Selenium's roles range from essential dietary element to semiconductor in advanced applications like xerography.

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique