180882
Poly(acrylonitrile-co-butadiene-co-styrene)
acrylonitrile ~40 wt. %, powder
Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme
About This Item
Formule linéaire :
[CH2CH(CN)]x(CH2CH=CHCH2)y[CH2CH(C6H5)]Z
Numéro CAS:
Numéro MDL:
Code UNSPSC :
12162002
ID de substance PubChem :
Produits recommandés
Forme
powder
Composition
acrylonitrile, ~40 wt. %
Solubilité
acetone, MEK and DMF: soluble
water and alcohols: insoluble
Densité
1.04 g/mL at 25 °C
Chaîne SMILES
C=CC=C.C=CC#N.C=Cc1ccccc1
Vous recherchez des produits similaires ? Visite Guide de comparaison des produits
Caractéristiques et avantages
High butadiene content.
Code de la classe de stockage
11 - Combustible Solids
Classe de danger pour l'eau (WGK)
WGK 3
Point d'éclair (°F)
Not applicable
Point d'éclair (°C)
Not applicable
Équipement de protection individuelle
Eyeshields, Gloves, type N95 (US)
Faites votre choix parmi les versions les plus récentes :
Déjà en possession de ce produit ?
Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.
Chia-Yuan Chang et al.
Bioresource technology, 102(9), 5325-5330 (2010-12-31)
This study investigated the feasibility and the treatment efficiency of a cyclic anoxic/aerobic two-stage MBR for treating polymeric industrial wastewater. The anoxic/aerobic hybrid MBR was operated without sludge withdrawal except sampling during the study. The results showed that the highest
Chul-Hyun Park et al.
Environmental science & technology, 42(1), 249-255 (2008-03-21)
Plastics are widely used in everyday life as a useful material, and thus their consumption is growing at a rate of about 5% per year in Korea. However, the constant generation of plastic wastes and their disposal generates environmental problems
Bo Lai et al.
Journal of chromatography. A, 1244, 161-167 (2012-05-25)
Acrylonitrile-butadiene-styrene (ABS) resin manufacturing wastewater is a complicated, toxic and refractory industrial wastewater. Comprehensive and accurate analysis of the typical pollutants in ABS resin manufacturing wastewater is critical to develop cost-effective wastewater treatment technologies. In this paper, a comprehensively qualitative
Chun-Chin Wang et al.
Journal of hazardous materials, 145(1-2), 136-141 (2006-12-13)
epsilon-Caprolactam has high COD and toxicity, so its discharge to natural water and soil systems may lead to an adverse environmental effect on water quality, endangering public health and welfare. This investigation attempts to isolate epsilon-caprolactam denitrifying bacteria from a
O Ciobanu
Revista medico-chirurgicala a Societatii de Medici si Naturalisti din Iasi, 116(2), 642-648 (2012-10-20)
Modern CAD/CAM and rapid fabrication technologies used in the prosthesis and orthotics manufacturing are based on 3D scanning, 3D reconstruction and computer aided fabrication. Paper approaches a study on the manufacture of customised orthosis (foot insole) through CAD/CAM and rapid
Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..
Contacter notre Service technique