Pular para o conteúdo
Merck
  • "Bio-glues" to enhance slipperiness of mucins: improved lubricity and wear resistance of porcine gastric mucin (PGM) layers assisted by mucoadhesion with chitosan.

"Bio-glues" to enhance slipperiness of mucins: improved lubricity and wear resistance of porcine gastric mucin (PGM) layers assisted by mucoadhesion with chitosan.

Soft matter (2014-11-22)
Nikolaos Nikogeorgos, Petr Efler, A Basak Kayitmazer, Seunghwan Lee
RESUMO

A synergetic lubricating effect between porcine gastric mucin (PGM) and chitosan based on their mucoadhesive interaction is reported at a hydrophobic interface comprised of self-mated polydimethylsiloxane (PDMS) surfaces. In acidic solution (pH 3.2) and low concentrations (0.1 mg mL(-1)), the interaction of PGM with chitosan led to surface recharge and size shrinkage of their aggregates. This resulted in higher mass adsorption on the PDMS surface with an increasing weight ratio of [chitosan]/[PGM + chitosan] up to 0.50. While neither PGM nor chitosan exhibited slippery characteristics, the coefficient of friction being close to 1, their mixture improved considerably the lubricating efficiency (the coefficient of friction is 0.011 at an optimum mixing ratio) and wear resistance of the adsorbed layers. These findings are explained by the role of chitosan as a physical crosslinker within the adsorbed PGM layers, resulting in higher cohesion and lower interlayer chain interpenetration and bridging.

MATERIAIS
Número do produto
Marca
Descrição do produto

Sigma-Aldrich
Clorofórmio, contains 100-200 ppm amylenes as stabilizer, ≥99.5%
Sigma-Aldrich
Clorofórmio, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains amylenes as stabilizer
Sigma-Aldrich
Clorofórmio, suitable for HPLC, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Clorofórmio, contains ethanol as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Ciclo-hexano, ACS reagent, ≥99%
Sigma-Aldrich
Ciclo-hexano, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Clorofórmio, suitable for HPLC, ≥99.8%, amylene stabilized
Sigma-Aldrich
Clorofórmio, puriss. p.a., reag. ISO, reag. Ph. Eur., 99.0-99.4% (GC)
Sigma-Aldrich
Ciclo-hexano, suitable for HPLC, ≥99.7%
Sigma-Aldrich
Clorofórmio, contains amylenes as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Clorofórmio, ReagentPlus®, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Ciclo-hexano, puriss. p.a., ACS reagent, ≥99.5% (GC)
Sigma-Aldrich
Trichloro(octadecyl)silane, ≥90%
Sigma-Aldrich
Clorofórmio, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Clorofórmio, ACS spectrophotometric grade, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Clorofórmio, biotech. grade, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Ciclo-hexano, Laboratory Reagent, ≥99.8%
Sigma-Aldrich
Clorofórmio, contains ethanol as stabilizer, meets analytical specification of BP, 99-99.4% (GC)
Sigma-Aldrich
Ciclo-hexano, ACS reagent, ≥99%
Sigma-Aldrich
Ciclo-hexano, anhydrous, 99.5%
Sigma-Aldrich
Clorofórmio, ≥99%, PCR Reagent, contains amylenes as stabilizer
Sigma-Aldrich
Clorofórmio, anhydrous, ≥99%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
trans-Decahydronaphthalene, 99%
Supelco
Clorofórmio, analytical standard
Supelco
Clorofórmio, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Ciclo-hexano, analytical standard
Sigma-Aldrich
Clorofórmio, anhydrous, contains amylenes as stabilizer, ≥99%
Supelco
Clorofórmio, Pharmaceutical Secondary Standard; Certified Reference Material