D03072T01

Filtro de cartucho Clarigard^®

nominal pore size 3.0 μm, cartridge nominal length × diam. 20 in. (564.0-572.0 mm) × 2.75 in. (70 mm)

• Código UNSPSC: 23151806

Propriedades

• Materiais: polypropylene filter
• Nível de qualidade: 400
• Características: hydrophilic
• fabricante/nome comercial: Clarigard^®
• Parâmetros: 4.8 bar max. differential pressure (70 psid) at 20 °C
• Cartucho: comprimento nominal × diâm.: 20 in. (564.0-572.0 mm) × 2.75 in. (70 mm)
• Impurezas: ≤0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction)
• extraíveis gravimétricos: ≤10 mg
• tamanho de poro: 3.0 μm nominal pore size; 3.0 μm pore size
• entrada: sample type liquid
• código do cartucho: Code 7 (2-226; O-Ring with locking tab and spear)

Descrição

Descrição geral

Clarigard^® filters 99.99% retention characteristic makes them ideal for the protection of critical downstream process steps such as membrane filters or chromatography columns. The graded-density depth structure of Clarigard^® filter media provides maximum filtration capacity, and the polypropylene construction offers low extractable levels and broad chemical compatibility.

Nota de preparo

Sterilization: May be autoclaved for 10 cycles of 30 minutes at 126 °C or steam sterilized for 10 cycles of 30 minutes at 126 °C or hot water sanitized at 80 °C maximum for 30 minutes.

Nota de análise

Gravimetric Extractables: After autoclaving and a 24-hour soak in ASTM^® Type 1 reagent grade water at controlled room temperature, meets the USP Oxidizable Substances Test requirements of <10 mg.

Outras notas

Directions for Use:

• Organism Retention: 99.99% retention
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Bioborden reduction
• Instructions for Use: Please refer to the Polygard^® and Clarigard^® Cartidges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Informações legais

ASTM is a registered trademark of American Society for Testing and Materials

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany