CWLS73S03

Milligard^® LPB 0.5/0.2 µm nominal, Cartridge

pore size 0.5/0.2 μm, cartridge nominal length 30 in. (75 cm)

• Sinônimo(s): Milligard Low Protein Binding Cartridge Filter 30 in. Code 7 0.2 μm
• Código UNSPSC: 23151806
• eCl@ss: 32031610

Propriedades

• Materiais: mixed cellulose esters (MCE) (low protein-binding); polyester support; polypropylene ; silicone seal
• Nível de qualidade: 400
• esterilidade: non-sterile
• Compatibilidade de esterilização: autoclavable compatible; steam-in-place compatible
• linha de produto: Milligard^®
• Características: hydrophilic
• fabricante/nome comercial: Milligard^®
• Parâmetros: 3.5 bar max. differential pressure (50 psid) at 25 °C; 3.5 bar max. inlet pressure (50 psi) at 25 °C
• técnica(s): prefiltration: suitable
• Comprimento: 30 in.
• Largura: 2.9 in.
• comprimento nominal do cartucho: 30 in. (75 cm)
• Diâmetro: 7.1 cm (2.8 in.)
• área de filtração: 2.1 m²
• Impurezas: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction); <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• extraíveis gravimétricos: ≤600 mg/cartridge
• matriz: Milligard^® LPB
• pore size: 0.5/0.2 μm nominal pore size; 0.5/0.2 μm pore size
• entrada: sample type liquid
• código do cartucho: Code 7

Descrição

Descrição geral

Device Configuration: Cartridge

Características e benefícios

Format: Double Layer

Embalagem

Double Easy-Open bag

Outras notas

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use:

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer to the installation and wetting sections of OptiScale^®-25 user guide and introduction section of the Mixed cellulose esters Tech Brief
• Storage Statement: Please refer to the Mixed cellulose esters Tech Brief
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Especificações

Filter Grade: Low Protein Binding Milligard^® Media

Nota de preparo

Sterilization Method
10 autoclave cycles or SIP @ 121 °C for 30 min

This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Nota de análise

Gravimetric Extractables: after a 5 L flush and 24 hours in water at controlled room temperature

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥12 L

Informações legais

MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

Informações de segurança

• Pictogramas: GHS02
• Palavra indicadora: Danger
• Frases de perigo: H228
• Declarações de precaução: P210 - P240 - P241 - P280 - P370 + P378
• Classificações de perigo: Flam. Sol. 1
• Código de classe de armazenamento: 4.1B - Flammable solid hazardous materials
• Classe de risco de água (WGK): WGK 3