Pular para o conteúdo
Merck
Todas as fotos(1)

Documentos

791903

Sigma-Aldrich

Conductive silver printing ink, resistivity 30 - 35 μΩ-cm

Sinônimo(s):

Dyesol® DYAG350 conductive silver ink, Screen printable silver paste

Faça loginpara ver os preços organizacionais e de contrato
Todas as fotos(1)

About This Item

Código UNSPSC:
12352103
NACRES:
NA.23

descrição

volume resistivity 30 - 35 μΩ-cm at a 180°C cure temperature

forma

paste (white)

composição

Solids content, 65-75%

viscosidade

6000-9000 mPa.s (at shear rate of 10 sec-1 at 25°C)

Descrição geral

Conductive silver printing ink, resistivity 30-35 μΩ-cm, is a combination of polymer coated silver particles and silver-based compounds in an organic medium. It is a low cost conductive ink that can be printed on a variety of substrates like polyester, glass, and indium tin oxide (ITO) which can be cured at 150-180 °C.

Aplicação

Conductive silver inks can be coated in between reduced graphene oxide (rGO) and copper surfaces to stabilize the charge carrying medium which can be used in the fabrication of a thermistor. Laser induced forward transfer (LIFT) may use conductive silver printing inks to print indium tin oxide nanoparticles based thin films for solar cells and organic light emitting diodes (OLEDS) based applications.
This Conductive Silver ink is an economical grade of specially formulated, screen-printable, conductive silver ink which provides good conductivity at low cure temperatures. This conductive silver ink provides low resistance of printed conducting tracks.

This Conductive Silver Printing Ink is comprised of a mixture of pure silver particles and organometallic silver compound in an organic medium. When printed on polyester (PET or PEN) films and then cured at 150 - 180°C, the particles consolidate to form a chemically-welded, continuous silver track to yield low bulk resistivity.

Informações legais

Dyesol is a registered trademark of Greatcell Solar

Pictogramas

Exclamation markEnvironment
GHS07,GHS09

Palavra indicadora

Warning

Frases de perigo

H315,H319,H410

Classificações de perigo

Aquatic Acute 1 - Aquatic Chronic 1 - Eye Irrit. 2 - Skin Irrit. 2

Código de classe de armazenamento

10 - Combustible liquids

Classe de risco de água (WGK)

WGK 3

Ponto de fulgor (°F)

174.2 °F

Ponto de fulgor (°C)

79 °C

Certificados de análise (COA)

Busque Certificados de análise (COA) digitando o Número do Lote do produto. Os números de lote e remessa podem ser encontrados no rótulo de um produto após a palavra “Lot” ou “Batch”.

Já possui este produto?

Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.

Visite a Biblioteca de Documentos

Os clientes também visualizaram

Slide 1 of 3

1 of 3

Silver nanoparticle ink 50 wt. %, dispersion in tripropylene glycol mono methyl ether

Sigma-Aldrich

796042

Silver nanoparticle ink

Silver nanoparticle ink 30 wt % dispersion in ethylene glycol

Sigma-Aldrich

798738

Silver nanoparticle ink

Carbon nanotube, single-walled, solvent-based conductive ink, SWCNT 1 mg/mL

Sigma-Aldrich

792462

Carbon nanotube, single-walled, solvent-based conductive ink, SWCNT

Design guidelines of laser reduced graphene oxide conformal thermistor for IoT applications.
Romero FJ, et al.
Sensors and actuators A, Physical, 274(1), 148-154 (2018)
Direct ink-jet printing and low temperature conversion of conductive silver patterns.
Smith PJ, et al.
J. Mater. Sci., 41(13), 4153-4158 (2006)
Conductive silver ink printing through the laser-induced forward transfer technique.
Florian C, et al.
Applied Surface Science, 336(1), 304-308 (2015)
Metal-based inkjet inks for printed electronics.
Kamyshny A, et al.
Open Applied Physics Journal, 4(1), 4153-4158 (2011)

Artigos

Reactive Silver Inks for High-Performance Printed Electronics

The ability to pattern conductive electrodes is technologically relevant for several applications, including photovolatics, displays, sensors, and biomedical devices.

High Crystalline Organic Transistors

Small molecular weight organic semiconductors are promising for flexible transistor applications in next-gen soft electronics.

Ruthenium-based dyes for Dye-sensitized Solar Cells

Dye-sensitized solar cells (DSCs) are 3rd generation solar cells combining the promise of high efficiency with low production costs.

Advancements in Organic Electronics

Professors Tokito and Takeda share design principles and optimization protocols for organic electronic devices, focusing on flexibility and low cost.

Ver tudo

Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.

Entre em contato com a assistência técnica