The synthesis method is proprietary. Further, the QC data is not available for this product at the M-Clarity level. Zinc oxide is doped with aluminum oxide (5-7% by mass) to stabilize the zinc oxide and prevent unwanted changes to the material. Particle size, XRD, and XPS are tested. Information regarding these tests is available on the lot-specific Certificates of Analysis, examples of which can be found in the documentation section of the product page on the website.
677450
Zinc oxide
nanopowder, <50 nm particle size (BET), >97%
Sinônimo(s):
Zinc monoxide, Zinc white
Faça loginpara ver os preços organizacionais e de contrato
About This Item
Fórmula linear:
ZnO
Número CAS:
Peso molecular:
81.39
Número MDL:
Código UNSPSC:
12352302
ID de substância PubChem:
NACRES:
NA.23
Preço e disponibilidade não estão disponíveis no momento.
Produtos recomendados
Nível de qualidade
Ensaio
>97%
Formulário
nanopowder
contém
6% Al as dopant
adequação da reação
reagent type: catalyst
core: zinc
área da superfície
>10.8 m2/g
tamanho de partícula
<50 nm (BET)
cadeia de caracteres SMILES
O=[Zn]
InChI
1S/O.Zn
chave InChI
XLOMVQKBTHCTTD-UHFFFAOYSA-N
Procurando produtos similares? Visita Guia de comparação de produtos
Aplicação
Employed in the preparation of NaZnSiO3OH, a novel chiral framework material which has potential application in ion exchange, adsorption or catalysis.
Informações legais
Product of Engi-Mat Co.
Palavra indicadora
Warning
Frases de perigo
Declarações de precaução
Classificações de perigo
Aquatic Acute 1 - Aquatic Chronic 1
Código de classe de armazenamento
13 - Non Combustible Solids
Classe de risco de água (WGK)
WGK 2
Ponto de fulgor (°F)
Not applicable
Ponto de fulgor (°C)
Not applicable
Equipamento de proteção individual
dust mask type N95 (US), Gloves
Escolha uma das versões mais recentes:
Já possui este produto?
Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.
Os clientes também visualizaram
Transparent Semiconducting ZnO:Al Thin Films Prepared by Spray Pyrolysis
W. T. Seeber, et al
Materials Science in Semiconductor Processing, 2, 45-55 (1999)
"Nanopowder synthesis of zinc oxide via solochemical processing.
Vaezi MR and Sadrnezhaad SK
Materials & Design, 28(2), 515-519 (2007)
Effect of Microstructural Control on Thermoelectric Properties of Hot-Pressed Aluminum-Doped Zinc Oxide
Y. Fujishiro, etal.
Journal of the American Ceramic Society. American Ceramic Society, 86, 2063-2066 (2003)
Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer.
Hau S, et al.
Applied Physics Letters, 92(25), 253301-253301 (2008)
Efficient hybrid solar cells from zinc oxide nanoparticles and a conjugated polymer.
Beek WJE, et al.
Advanced Materials, 16(12), 1009-1013 (2004)
Artigos
Operation principle and market dominance of single crystalline silicon solar cells.
Dye-sensitized solar cells (DSCs) are 3rd generation solar cells combining the promise of high efficiency with low production costs.
Organic photovoltaics (OPVs) represent a low-cost, lightweight, and scalable alternative to conventional solar cells. While significant progress has been made in the development of conventional bulk heterojunction cells, new approaches are required to achieve the performance and stability necessary to enable commercially successful OPVs.
Among various ceramics, one-dimensional (1-D) piezoelectric ceramics have attracted significant scientific attention for use in energy harvesting.
-
Could I know the synthesis method? FTiR ? XPS? How are they stabilized? XRD? BET?
1 answer-
Helpful?
-
-
How is shipping temperature determined? And how is it related to the product storage temperature?
1 answer-
Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf
Helpful?
-
-
How can I determine the shelf life / expiration / retest date of this product?
1 answer-
If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdfHelpful?
-
Active Filters
Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.
Entre em contato com a assistência técnica
