Adsorption of water vapour from humid air in carbon molecular sieves: carbosieve S-III and carboxens 569, 1000 and 1001.

Adsorption of water vapour from humid air in carbon molecular sieves: carbosieve S-III and carboxens 569, 1000 and 1001.

The Analyst (2003-03-11)

Patrycja Fastyn, Wojciech Kornacki, Malgorzata Kardaś, Janusz Gawlowski, Jan Niedzielski

RÉSUMÉ

The adsorption of water vapour in carbon molecular sieves (CMS) used to determine volatile organic compounds (VOCs) in air was investigated. The CMS mass in the trap was found not to affect the mass of retained water under conditions of incomplete saturation of the adsorbent bed with water. Thus, the restrictions commonly imposed on the CMS mass are not necessary. The usefulness of four different CMSs to sample large volumes of humid air was estimated. Carboxen 1000 exhibited the best performance. To assess the magnitude of CMS mass in the trap in dependence on the volume, the relative humidity and the temperature of the sample, the use of a novel parameter, called the water vapour interference factor, was suggested.

MATÉRIAUX

Référence du produit

Marque

Description du produit

57348-U

Supelco

Ensemble de fibres de SPME, divinylbenzène/carboxène/polydiméthylsiloxane (DVB/CAR/PDMS), matrix active group 50/30µm DVB/CAR/PDMS, needle size 24 ga, StableFlex fiber, for use with autosampler, fiber L 2 cm, pk of 3

57328-U

Supelco

Ensemble de fibres de SPME, divinylbenzène/carboxène/polydiméthylsiloxane (DVB/CAR/PDMS), matrix active group 50/30µm DVB/CAR/PDMS, StableFlex fiber, manual holder, needle size 24 ga

57298-U

Supelco

Ensemble de fibres de SPME, divinylbenzène/carboxène/polydiméthylsiloxane (DVB/CAR/PDMS), 50/30µm DVB/CAR/PDMS, StableFlex (1 cm), needle size 23 ga, Autosampler, pk of 3, plain gray hub

20358

Supelco

ORBO^™ 90, Carboxen^® 564 (20/45), 160/80 mg, W,F,F separators, O.D. × L 6 mm × 75 mm, pkg of 25 ea, for analyte group MEK (methylethyl ketone)

57329-U

Supelco

Ensemble de fibres de SPME, divinylbenzène/carboxène/polydiméthylsiloxane (DVB/CAR/PDMS), matrix active group 50/30µm DVB/CAR/PDMS, needle size 24 ga, StableFlex, for use with autosampler, fiber L 1 cm, pk of 3

57299-U

Supelco

Ensemble de fibres de SPME, divinylbenzène/carboxène/polydiméthylsiloxane (DVB/CAR/PDMS), 50/30µm DVB/CAR/PDMS, StableFlex (2cm), needle size 23 ga, Autosampler, pk of 3, notched gray hub

20355

Supelco

ORBO-78 400/200 MG PK/25, W,W,W separators, O.D. × L 6 mm × 110 mm, pkg of 25 ea

25467

Supelco

Colonne capillaire Carboxen^®-1010 PLOT pour GC/CPG, L × I.D. 30 m × 0.53 mm, average thickness 30 μm

57318

Supelco

Unité de fibres SPME, carboxène/polydiméthylsiloxane (CAR/PDMS), d_f 75 μm(CAR/PDMS, for use with manual holder, needle size 24 ga

10478-U

Supelco

Adsorbant Carboxen^®, matrix Carboxen^® 1000, 60-80 mesh, bottle of 10 g

25461

Supelco

Colonne capillaire Carboxen^®-1006 PLOT pour GC/CPG, L × I.D. 30 m × 0.53 mm, average thickness 30 μm

57295-U

Supelco

Unité de fibres SPME, carboxène/polydiméthylsiloxane (CAR/PDMS), d_f 85 μm(CAR/PDMS, needle size 23 ga, StableFlex, for use with autosampler

57335-U

Supelco

Unité de fibres SPME, carboxène/polydiméthylsiloxane (CAR/PDMS), d_f 85 μm(CAR/PDMS, needle size 24 ga, StableFlex, for use with autosampler

24246

Supelco

Colonne capillaire Carboxen^®-1010 PLOT pour GC/CPG, L × I.D. 30 m × 0.32 mm, average thickness 15 μm

57319

Supelco

Unité de fibres SPME, carboxène/polydiméthylsiloxane (CAR/PDMS), d_f 75 μm(CAR/PDMS, needle size 24 ga, for use with autosampler

57334-U

Supelco

Unité de fibres SPME, carboxène/polydiméthylsiloxane (CAR/PDMS), d_f 85 μm(CAR/PDMS, needle size 24 ga, for use with manual holder, StableFlex fiber

10184

Supelco

Carbosieve Adsorbent, matrix Carbosieve S-III, 60-80 mesh, bottle of 10 g

57343-U

Supelco

Unité de fibres SPME, carboxène/polydiméthylsiloxane (CAR/PDMS), d_f 75 μm(CAR/PDMS, needle size 23 ga, for use with autosampler

57344-U

Supelco

Unité de fibres SPME, carboxène/polydiméthylsiloxane (CAR/PDMS), d_f 75 μm(CAR/PDMS, needle size 23 ga, for use with manual holder

24241-U

Supelco

Colonne capillaire Carboxen^®-1006 PLOT pour GC/CPG, L × I.D. 30 m × 0.32 mm, average thickness 15 μm

57914-U

Supelco

Ensemble de fibres de SPME, divinylbenzène/carboxène/polydiméthylsiloxane (DVB/CAR/PDMS), for use with autosampler, matrix active group 50/30µm DVB/CAR/PDMS, needle size 23 ga, metal alloy fiber, fiber L 2 cm

54041-U

Supelco

Carboxen^® 1000 Reversible SPE Tube, 200 mg/mL, pk 30

11072-U

Supelco

Adsorbant Carboxen^®, matrix Carboxen^® 572, 20-45 mesh, bottle of 10 g

10477-U

Supelco

Adsorbant Carboxen^®, matrix Carboxen^® 1000, 40-60 mesh, bottle of 50 g

28718-U

Supelco

Tenax^® TA / Carboxen^® 1018, glass TD tube, preconditioned, O.D. × L 1/4 in. × 3 1/2 in., Sealed with (Swagelok^® End-Fittings), pkg of 10 ea

10269

Supelco

Adsorbant Carboxen^®, matrix Carboxen^® 569, 20-45 mesh, bottle of 10 g

10471

Supelco

Adsorbant Carboxen^®, matrix Carboxen^® 1003, 40-60 mesh, bottle of 10 g

23446-U

Supelco

Tube de sorbant ORBO^™-93, ORBO tube I.D. × L 6 mm × 95 mm, Bed A 180 mg, Bed B 90 mg, 60/80 mesh, pkg of 25 ea

10189

Supelco

Carbosieve Adsorbent, matrix Carbosieve S-II, 60-80 mesh, bottle of 10 g

57912-U

Supelco

Ensemble de fibres de SPME, divinylbenzène/carboxène/polydiméthylsiloxane (DVB/CAR/PDMS), matrix active group 50/30µm DVB/CAR/PDMS, needle size 23 ga, metal alloy fiber, for use with autosampler, fiber L 1 cm, pkg of 1 × ea