Application of the Fenton process in the elimination of helminth eggs.

Application of the Fenton process in the elimination of helminth eggs.

Journal of water and health (2014-12-05)

Sandra Isabel Escobar-Megchún, Hugo Alejandro Nájera-Aguilar, Magaly González-Hilerio, Javier Gutiérrez-Jiménez, Rubén Fernando Gutiérrez-Hernández, María Neftalí Rojas-Valencia

PMID25473981

RÉSUMÉ

This study relates to a method for evaluating the degradation efficiency of Ascaris lumbricoides eggs through a Fenton reaction, using hydrogen peroxide (H2O2) at 100, 250, and 500 mg/L, ferrous sulfate (FeSO4) at 458 mg/L Fe(2+) and pH values of 3, 4.5, and 6. The experiments were conducted according to a 3(2) experimental design, with 1:1, 3:1, and 5:1 (H2O2/Fe(2+)) molar ratios. The oxidation and flocculation stages were performed at 130 rpm during 2 hours and at 25-30 rpm during 20 min, respectively. As a result of the Fenton reaction, an average of 91.2% Ascaris lumbricoides egg degradation was achieved at pH 6 using a 500 mg/L dose of H2O2 and a 3:1 (H2O2/Fe(2+)) molar ratio. Thus, this process is an alternative for eliminating parasites that are resistant to conventional disinfection processes and significantly reduces the human health hazard they represent.

MATÉRIAUX

Référence du produit

Marque

Description du produit

216763

Sigma-Aldrich

Peroxyde d'hydrogène solution, contains inhibitor, 30 wt. % in H₂O, ACS reagent

H1009

Sigma-Aldrich

Peroxyde d'hydrogène solution, 30 % (w/w) in H₂O, contains stabilizer

F7002

Sigma-Aldrich

Iron(II) sulfate heptahydrate, ReagentPlus^®, ≥99%

215422

Sigma-Aldrich

Iron(II) sulfate heptahydrate, ACS reagent, ≥99.0%

516813

Sigma-Aldrich

Peroxyde d'hydrogène solution, 50 wt. % in H₂O, stabilized

12310

Sigma-Aldrich

Iron, ≥99%, reduced, powder (fine)

F8633

Sigma-Aldrich

Iron(II) sulfate heptahydrate, BioReagent, suitable for cell culture, suitable for insect cell culture, ≥99%

349887

Sigma-Aldrich

Peroxyde d'hydrogène solution, contains inhibitor, 35 wt. % in H₂O

C3518

Sigma-Aldrich

Carbonyl iron, ≥97% Fe basis

F8263

Sigma-Aldrich

Iron(II) sulfate heptahydrate, suitable for plant cell culture, ≥99%

44890

Sigma-Aldrich

Iron, puriss. p.a., carbonyl-Iron powder, low in magnesium and manganese compounds, ≥99.5% (RT)

209309

Sigma-Aldrich

Iron, powder, −325 mesh, 97%

413054

Sigma-Aldrich

Iron, granular, 10-40 mesh, >99.99% trace metals basis

88597

Millipore

Peroxyde d'hydrogène solution, 3%, suitable for microbiology

356808

Sigma-Aldrich

Iron, foil, thickness 0.1 mm, ≥99.9% trace metals basis

267945

Sigma-Aldrich

Iron, chips, 99.98% trace metals basis

356824

Sigma-Aldrich

Iron, wire, diam. 1.0 mm, ≥99.9% trace metals basis

18304

Sigma-Aldrich

Peroxyde d'hydrogène solution, 34.5-36.5%

95321

Supelco

Peroxyde d'hydrogène solution, ≥30%, for trace analysis

H3410

Sigma-Aldrich

Peroxyde d'hydrogène solution, contains inhibitor, 30 wt. % in H₂O, meets USP testing specifications

16911

Supelco

Peroxyde d'hydrogène solution, 30 % (w/w), for ultratrace analysis

GF45572474

Iron, foil, 100x100mm, thickness 0.25mm, hard, 99.5%

338141

Sigma-Aldrich

Iron, foil, thickness 0.25 mm, ≥99.99% trace metals basis

95294

Sigma-Aldrich

Peroxyde d'hydrogène solution, tested according to Ph. Eur.

GF13723758

Iron, foil, 300x300mm, thickness 0.1mm, hard, 99.5%

GF66605856

Iron, foil, 100x100mm, thickness 0.125mm, as rolled, 99.99+%

GF62438520

Iron, rod, 200mm, diameter 25mm, as drawn, 98+%

GF93209328

Iron, tube, 200mm, outside diameter 8.0mm, inside diameter 5mm, wall thickness 1.5mm, annealed, 99.5%

GF52254233

Iron, rod, 100mm, diameter 100mm, as drawn, armcO« soft ingot 99.8%

GF00607070

Iron, foil, 100x100mm, thickness 1.0mm, as rolled, 99.5%