Accéder au contenu
Merck
Toutes les photos(3)

Principaux documents

Voir toute la documentation

310506

Sigma-Aldrich

Sodium bromide

ACS reagent, ≥99.0%

Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme

Sélectionner une taille de conditionnement

100 G
30,30 €
500 G
80,70 €

30,30 €

Veuillez contacter notre Service Clients pour connaître la disponibilité de ce produit.
Devis pour commande en gros
Toutes les photos(3)

Sélectionner une taille de conditionnement

Changer de vue
100 G
30,30 €
500 G
80,70 €

About This Item

Formule linéaire :
NaBr
Numéro CAS:
7647-15-6
Poids moléculaire :
102.89
Numéro CE :
231-599-9
Numéro MDL:
MFCD00003475
Code UNSPSC :
12352302
eCl@ss :
38050404
ID de substance PubChem :
329753628
Nomenclature NACRES :
NA.21

30,30 €

Veuillez contacter notre Service Clients pour connaître la disponibilité de ce produit.
Devis pour commande en gros

Qualité

ACS reagent

Niveau de qualité

200

Agence

suitable for EPA 300

Pression de vapeur

1 mmHg ( 806 °C)

Essai

≥99.0%

Forme

powder, crystals or granules

Impuretés

≤0.005% insolubles

pH

5.0-8.8 (25 °C, 5%)

Pf

755 °C (lit.)

Solubilité

ethanol: soluble(lit.)
water: soluble(lit.)

Traces d'anions

bromate (BrO3-): ≤0.001%
chloride (Cl-): ≤0.2%
sulfate (SO42-): ≤0.002%

Traces de cations

Ba: ≤0.002%
Ca: ≤0.002%
Fe: ≤5 ppm
K: ≤0.1%
Mg: ≤0.001%
heavy metals: ≤5 ppm (by ICP-OES)

Chaîne SMILES 

[Na+].[Br-]

InChI

1S/BrH.Na/h1H;/q;+1/p-1

Clé InChI

JHJLBTNAGRQEKS-UHFFFAOYSA-M

Vous recherchez des produits similaires ? Visite Guide de comparaison des produits

Catégories apparentées

Description générale

Sodium Bromide is an inorganic compound that is commonly used as a source of bromide ions as a nucleophile or nucleophilic catalyst. It is also used as a precursor to reactive electrophilic bromine species, which are useful for a variety of organic transformations.

Application

Sodium Bromide can be used as a catalyst in TEMPO-mediated oxidation reactions. It is also used to grow the single crystal of γ-glycine by the slow cooling method.

Autres remarques

Go to Redi-Dri™ Product Listing 793574

Informations légales

Redi-Dri is a trademark of Sigma-Aldrich Co. LLC

Pictogrammes

Health hazardExclamation mark
GHS08,GHS07

Mention d'avertissement

Warning

Mentions de danger

H336,H361fd,H373

Classification des risques

Repr. 2 - STOT RE 2 - STOT SE 3

Organes cibles

Central nervous system

Code de la classe de stockage

13 - Non Combustible Solids

Classe de danger pour l'eau (WGK)

WGK 1

Point d'éclair (°F)

Not applicable

Point d'éclair (°C)

Not applicable

Faites votre choix parmi les versions les plus récentes :

Certificats d'analyse (COA)

Lot/Batch Number
0000421271
0000421271
0000312784
0000312784
0000252586

Vous ne trouvez pas la bonne version ?

Si vous avez besoin d'une version particulière, vous pouvez rechercher un certificat spécifique par le numéro de lot.

Rechercher un(e) COA

Déjà en possession de ce produit ?

Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.

Consulter la Bibliothèque de documents

Les clients ont également consulté

Slide 1 of 6

1 of 6

Isotopic standard for bromine NIST® SRM® 977

NIST977

Isotopic standard for bromine

bromure de potassium ACS reagent, ≥99.0%

Sigma-Aldrich

243418

bromure de potassium

1-Bromobutane ReagentPlus®, 99%

Sigma-Aldrich

B59497

1-Bromobutane

Sodium nitrate ≥99.0%, suitable for plant cell culture

Sigma-Aldrich

S5022

Sodium nitrate

Sodium iodide ACS reagent, ≥99.5%

Sigma-Aldrich

383112

Sodium iodide

Butan-1-ol ACS reagent, ≥99.4%

Sigma-Aldrich

360465

Butan-1-ol

Eagleson M.
Concise Encyclopedia Chemistry, 996-996 (1994)
Ling Yue et al.
Applied biochemistry and biotechnology, 175(7), 3557-3570 (2015-02-05)
A novel aqueous two-phase system (ATPS) only containing Gemini surfactant ethanediyl-1,2-bis(dodecyldimethylammonium bromide) and an inorganic salt sodium bromide was designed, and the physicochemical properties of the ATPS were investigated systematically. The results have shown that the coexisting two phases, one
Sergiu Coseri et al.
Carbohydrate polymers, 116, 9-17 (2014-12-03)
Unoxidized and carboxylated pullulan (obtained by pullulan oxidation using TEMPO-sodium hypochlorite-sodium bromide system) have been used as mediators for the silver nanoparticles formation (AgNPs), under environment-friendly conditions: using aqueous solutions, room temperature and notably, by using both mediators as reducing
Sodium bromide catalysed one-pot synthesis of tetrahydrobenzo [b] pyrans via a three-component cyclocondensation under microwave irradiation and solvent free conditions.
Devi I and Bhuyan PJ.
Tetrahedron Letters, 45(47), 8625-8627 (2004)
Density, viscosity, and electrolytic conductivity of concentrated aqueous electrolyte solutions at several temperatures. Alkaline-earth chlorides, lanthanum chloride, sodium chloride, sodium nitrate, sodium bromide, potassium nitrate, potassium bromide, and cadmium nitrate.
Isono T.
Journal of Chemical and Engineering Data, 29(1), 45-52 (1984)
Afficher tous les articles scientifiques apparentés

Contenu apparenté

Environmental Methods Consumables Look Up Tool

This page is intended to make it easier to find the consumables you need based on the analytical method you’re using. Methods included on this page come from the EPA, Standard Methods and ASTM.

Questions

1–2 of 2 Questions  

  1. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  2. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

Reviews

No rating value

Active Filters

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique