There is no manual or instructions available for this product. Technical Service should be contacted for any questions.
Fortfahren mit
59101
Säulenrohling-Kit für HPLC
I.D. × O.D. × L 4.6 mm × 1/4 in. × 15 cm
Anmelden zur Ansicht der Organisations- und Vertragspreise.
Größe auswählen
Ansicht ändern
| Größe/SKU | Verfügbarkeit | Preis |
|---|
Über diesen Artikel
UNSPSC Code:
41115700
NACRES:
NB.21
Preise und Verfügbarkeit sind derzeit nicht verfügbar.
Technischer Dienst
Benötigen Sie Hilfe? Unser Team von erfahrenen Wissenschaftlern ist für Sie da.
Unterstützung erhaltenmaterial
316L stainless steel
I.D. × O.D. × L
4.6 mm × 1/4 in. × 15 cm
General description
Jeder Leersäulenbausatz besteht aus einer präzisionsgebohrten, polierten 316 Edelstahl-Leersäule, zwei totvolumenfreien
externen Reduzierstücken (interne Verbinder bei 10mm I.D.-Leersäulen) mit Fittings und Ferrules für 1/16 in. OD-Tubing und zwei 2 μm- Fritten. Weitere Größen sind auf Anfrage ebenfalls erhältlich.
externen Reduzierstücken (interne Verbinder bei 10mm I.D.-Leersäulen) mit Fittings und Ferrules für 1/16 in. OD-Tubing und zwei 2 μm- Fritten. Weitere Größen sind auf Anfrage ebenfalls erhältlich.
1 of 1
Dieser Artikel | ||
|---|---|---|
| description I.D. × O.D. × L 4.6 mm × 1/4 in. × 15 cm | description phase carboxymethyl, L × I.D. 2.5 cm × 6 mm, 10 μm particle size | description Stand-Alone (Swivel-type), for use with Supelguard cartridges (2 cm L. x 2 to 4.6 mm I.D.) |
| material 316L stainless steel | material PEEK | material stainless steel holder |
| I.D. × O.D. × L 4.6 mm × 1/4 in. × 15 cm | I.D. × O.D. × L - | I.D. × O.D. × L - |
Still not finding the right product?
Explore all of our products under Säulenrohling-Kit für HPLC
Hier finden Sie alle aktuellen Versionen:
Besitzen Sie dieses Produkt bereits?
In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.
-
Is a manual or other instructions of use available for this product?
1 answer-
Helpful?
-
-
I need to replace the frit in my 1/4 inch OD Column Blank Kit (4.6mm ID), Product 59101. Which frit should be purchased?
1 answer-
The Empty Column Blank (Product No. 59101) requires a frit for a ¼ in. column, which comes in pore sizes of 0.5μm and 2μm. The product numbers are 59038 and 58264, respectively. We generally recommend the 0.5μm frits for particle sizes less than 5μm, and the 2μm for larger particle sized packings.
Helpful?
-
-
What is the pressure rating for 59101 Column Blank Kit for HPLC?
1 answer-
Under its intended use, the standard 15cm x 4.6mm HPLC column blank should go no higher than 5,000 psi.
Helpful?
-
-
I need extra fittings for my 1/4 inch OD Column Blank Kit (4.6mm ID), Product 59101. Which fitting should be purchased?
1 answer-
The Empty Column Blank (Product No. 59101) comes with two size fittings: one that is a part of the column and one that connects 1/16 in. tubing to the column. The column inlet/outlet fitting is a reducing union from 1/4 in.-1/16 in., Product No. Z226564. The nuts/ferrule combination used to connect 1/16 in. tubing to the inlet and outlet of the column is a 10-32 Valco fitting. The product number for a pack of 10 nuts is 22990-U, and for the matching ferrules, Product No. 22988.
Helpful?
-
-
What is the Department of Transportation shipping information for this product?
1 answer-
Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
Helpful?
-
-
How do I clean the HPLC Column Blank, Product No. 59101, after use?
1 answer-
First, check the instrument or pump manual to make sure the system can be used with a solution of 6-10% nitric acid. Once all packing has been carefully removed from the column and disposed of properly, flush the column with hot HPLC grade or distilled water to remove residual packing or salts that may have precipitated during use. Then passivate the column with a solution of 6-10% nitric acid at a flow rate of approximately 4-5 mL per minute. Flush thoroughly with HPLC grade or distilled water, then methanol.
Helpful?
-