P2C300C25

Pellicon^® 2 Maxi-Ultrafiltrationsmodul

filtration area 2.5 m², NMWCO 300 kDa

• Synonym(e): Pellicon 2 Maxi Ultrafiltration Module PLCMK C 2.5 m²
• UNSPSC-Code: 23151806

Eigenschaften

• Materialien: composite regenerated cellulose (CRC) ; polypropylene screen; polyurethane adhesive
• Qualitätsniveau: 400
• Hersteller/Markenname: Pellicon^®
• Parameter: 0.33 bar max. transmembrane pressure (5 psig) (reverse); 3.5 bar max. transmembrane pressure (50 psig) at 30 °C (forward); 5-35 L/min recirculation rate at 0.4 bar (6 psi)
• Methode(n): analytical sample preparation: suitable; protein purification: suitable
• Höhe: 7.6 cm (3 in.)
• Länge: 21 cm (8.3 in.)
• Breite: 17.8 cm (7.0 in.)
• Filtrationsfläche: 2.5 m²
• membrane nominal area: 2.5 m²
• Gravimetrisch bestimmte extrahierbare Substanzen: ≤1500 mg/m²
• Matrix: Ultracel^®
• Porengröße: 300 kDa NMWCO
• pH-Wert: 2-13

Beschreibung

Allgemeine Beschreibung

The Pellicon^® 2 Ultrafiltration PLCMK Maxi Cassette sets the standard in cassette-style tangential flow filtration devices. P2C300C25 was designed with process scale-up and applications development in mind.

Millipore′s PLCMK polyethersulfone membrane has void-free structures that guard against leakage of solutes through microdefects normally associated with voids beneath the thin skins of conventional UF membranes. These void-free membranes are more permeable, resulting in high-flux with equivalent or superior product retention. These void-free membranes provide the advantages of fast, high yield processing and smaller systems.

The Pellicon^® 2 Maxi Ultrafiltration Module feature a filtration area of 2.5 m² with a pore size of 300 kDa NMWCO.

Anwendung

Concentration, desalting or buffer exchange of:

• Protein solutions
• Polysaccharide solutions
• Virus suspensions

Harvest, washing or clarification of:

• Cell cultures and lysates
• Colloidal suspensions
• Viral cultures

Leistungsmerkmale und Vorteile

• Type C screen (coarse screen)
• Leading-edge void- free membranes to match virtually any separation challenge
• Short flow path for higher flux and higher resolution separation capability
• Choice of flow channel configuration providing process optimization capability
• Predictable, fast, scale-up
• True linear scalability from laboratory size modules to industrial assemblies for processing thousands of liters
• Brings higher resolution, improved yields and superior back-pressure resistance
• Ultracel membranes are composite membranes cast on a microporous substrate for defect-free membranes with superior

Sonstige Hinweise

Diese Produkte werden in einem Werk hergestellt, das den GMP-Richtlinien der FDA entspricht.

Prefiltration Rquirements: 100 µm

Hinweis zur Analyse

Gravimetric Extractables: after a water flush

Rechtliche Hinweise

Pellicon is a registered trademark of Merck KGaA, Darmstadt, Germany

ULTRACEL is a registered trademark of Merck KGaA, Darmstadt, Germany

Sicherheitshinweise

• Lagerklassenschlüssel: 12 - Non Combustible Liquids
• WGK: WGK 2
• Flammpunkt (°F): Not applicable
• Flammpunkt (°C): Not applicable