Direkt zum Inhalt
Merck

Fortfahren mit

CVHL03TP3

Durapore® (w/Prefilter) 0.45 µm, Cartridge

pore size 0.45 μm, cartridge nominal length 30 in. (75 cm), Code 0 (2-222; O-rings)

Synonym(e):

Durapore Cartridge Filter with prefilter 30 in. 0.45 μm Code 0, Durapore® w/Prefilter Cartridge

Anmelden zur Ansicht der Organisations- und Vertragspreise.

Größe auswählen

Ansicht ändern
Größe/SKUVerfügbarkeitPreis

Über diesen Artikel

eCl@ss:
32031690
UNSPSC Code:
23151806
Preise und Verfügbarkeit sind derzeit nicht verfügbar.
Technischer Dienst
Benötigen Sie Hilfe? Unser Team von erfahrenen Wissenschaftlern ist für Sie da.
Unterstützung erhalten


Produktname

Durapore® (mit Vorfilter), 0,45 µm, Kartusche, Chemistry: 0.45 μm Hydrophilic Polyvinylidene Fluoride (PVDF)Configuration: 30 in. Code 0

Quality Segment

material

PVDF , mixed cellulose esters (MCE) prefilter, polypropylene , polypropylene support, silicone seal

reg. compliance

meets EU framework regulation [1935/2004/EC] (all component materials; regarding materials and articles intended to contact food), meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)

sterility

non-sterile

sterilization compatibility

autoclavable compatible
steam-in-place compatible

product line

Durapore®

feature

hydrophilic

manufacturer/tradename

Durapore®

parameter

≤45 mL/min air diffusion at 1.5 bar (22 psig) and 23 °C (in water), 0.35 bar max. differential pressure (5 psid) at 135 °C (Forward), 0.35 bar max. inlet pressure (5 psi) at 135 °C (Forward), 1.7 bar max. differential pressure (25 psid) at 80 °C (Forward), 1.7 bar max. inlet pressure (25 psi) at 80 °C (Forward), 3.5 bar max. differential pressure (50 psid) at 25 °C (Reverse), 3.5 bar max. inlet pressure (50 psi) at 25 °C (Reverse), 5.5 bar max. differential pressure (80 psid) at 25 °C (Forward), 5.5 bar max. inlet pressure (80 psi) at 25 °C (Forward)

technique(s)

bioburden reduction: suitable

L

30 in.

W

2.7 in.

cartridge nominal length

30 in. (75 cm)

diam.

6.9 cm (2.7 in.)

filtration area

2.07 m2

impurities

≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction), <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)

gravimetric extractables

≤135 mg/cartridge

matrix

Durapore® (w/Prefilter)

pore size

0.45 μm pore size

input

sample type liquid

bubble point

≥1930 mbar (28 psig), air with water at 23 °C

cartridge code

Code 0 (2-222; O-rings)

General description

Device Configuration: Filterelement

Packaging

Leicht zu öffnender Doppelbeutel

Preparation Note

Sterilization Method
10 In-situ-Dampfsterilisationszyklen von 30 min oder 10 Autoklavenzyklen von 60 min bei 121 °C
This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Analysis Note

Erfüllt die Anforderungen des USP-Tests auf oxidierbare Substanzen nach Durchspülen mit ≥3 l Wasser
Gravimetric Extractables: after 24 hours in water at controlled room temperature

Other Notes

Diese Produkte werden in einem Werk hergestellt, das den GMP-Richtlinien der FDA entspricht.
Directions for Use

  • Organism Retention: Microorganism
  • Mode of Action: Filtration (size exclusion)
  • Application: BioProcessing
  • Intended Use: Reduction or removal of microorganism/bioburden
  • Instructions for Use: Please refer Wetting Instructions for Filter Units with Durapore® Membrane user guide
  • Storage Statement: Store in dry location
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Legal Information

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

Ähnliche Artikel vergleichen

Vollständigen Vergleich anzeigen

Unterschiede anzeigen

1 of 1

Dieser Artikel
CVHL73TP3CVHL02TP3CVHL01TP3
description

Chemistry: 0.45 μm Hydrophilic Polyvinylidene Fluoride (PVDF)Configuration: 30 in. Code 0

description

Chemistry: 0.45 μm Hydrophilic Polyvinylidene Fluoride (PVDF)Configuration: 30 in. Code 7

description

Chemistry: 0.45 μm Hydrophilic Polyvinylidene Fluoride (PVDF)Configuration: 20 in. Code 0

description

Chemistry: 0.45 μm Hydrophilic Polyvinylidene Fluoride (PVDF)Configuration: 10 in. Code 0

pore size

0.45 μm pore size

pore size

0.45 μm pore size

pore size

0.45 μm pore size

pore size

0.45 μm pore size

filtration area

2.07 m2

filtration area

2.06 m2

filtration area

1.38 m2

filtration area

0.69 m2

product line

Durapore®

product line

Durapore®

product line

Durapore®

product line

Durapore®

technique(s)

bioburden reduction: suitable

technique(s)

bioburden reduction: suitable

technique(s)

bioburden reduction: suitable

technique(s)

bioburden reduction: suitable

manufacturer/tradename

Durapore®

manufacturer/tradename

Durapore®

manufacturer/tradename

Durapore®

manufacturer/tradename

Durapore®

matrix

Durapore® (w/Prefilter)

matrix

Durapore® (w/Prefilter)

matrix

Durapore® (w/Prefilter)

matrix

Durapore® (w/Prefilter)


Still not finding the right product?


Lagerklasse

11 - Combustible Solids

Was ist los?

WGK 2



Hier finden Sie alle aktuellen Versionen:

Analysenzertifikate (COA)

Lot/Batch Number

It looks like we've run into a problem, but you can still download Certificates of Analysis from our Dokumente section.

Wenn Sie Hilfe benötigen, wenden Sie sich bitte an Kundensupport

Besitzen Sie dieses Produkt bereits?

In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.

Die Dokumentenbibliothek aufrufen



Questions

Reviews

No rating value

Active Filters