Saltar al contenido
Merck
  • Determination of nitroimidazole residues in aquaculture tissue using ultra high performance liquid chromatography coupled to tandem mass spectrometry.

Determination of nitroimidazole residues in aquaculture tissue using ultra high performance liquid chromatography coupled to tandem mass spectrometry.

Journal of chromatography. B, Analytical technologies in the biomedical and life sciences (2014-05-06)
Anna Gadaj, Valentina di Lullo, Helen Cantwell, Martin McCormack, Ambrose Furey, Martin Danaher
RESUMEN

An UHPLC-MS/MS method was developed for the quantitative confirmatory analysis of residues of nitroimidazole drugs (dimetridazole, ipronidazole, metronidazole, ornidazole and ronidazole) and their corresponding hydroxy metabolites (HMMNI, ipronidazile-OH and metronidazole-OH) in aquaculture tissue. Samples were extracted by shaking in acetonitrile, water, MgSO4 and NaCl before being defatted with n-hexane pre-saturated with acetonitrile and concentrated under nitrogen. Nitroimidazole residues were determined by UHPLC-MS/MS operating in positive electrospray ionisation mode using a reversed phase BEH C18 column. The method was validated according to the EU Commission Decision 2002/657/EC guidelines. The following performance studies were carried out: specificity, selectivity, linearity, within laboratory repeatability (WLr)/reproducibility (WLR), accuracy, precision, decision limit (CCα), detection capability (CCβ), absolute recovery and stability. The analytical range of the method is 0.1-20 μg kg(-1). Accuracy and precision of the method, under within-laboratory reproducibility conditions, ranged from 83 to 105% and 2.3 to 14.0%, respectively. CCα were 0.07-1.0 μg kg(-1) depending on analyte and matrix. A total of 50 samples can be analysed in a single day using the assay. The method has been extensively evaluated through application to real test samples.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Acetonitrilo, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Metanol, suitable for HPLC, ≥99.9%
Sigma-Aldrich
2-Propanol, suitable for HPLC, 99.9%
Sigma-Aldrich
2-Propanol, ACS reagent, ≥99.5%
Sigma-Aldrich
Metanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Acetonitrilo, HPLC Plus, ≥99.9%
Sigma-Aldrich
Metanol, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Ácido fórmico, reagent grade, ≥95%
Sigma-Aldrich
Metanol, HPLC Plus, ≥99.9%
Sigma-Aldrich
Sulfato de magnesio, anhydrous, ReagentPlus®, ≥99.5%
Sigma-Aldrich
Hexano, suitable for HPLC, ≥97.0% (GC)
Sigma-Aldrich
Ácido fórmico, ACS reagent, ≥96%
Sigma-Aldrich
Hexano, ReagentPlus®, ≥99%
Sigma-Aldrich
Hexano, suitable for HPLC, ≥95%
Sigma-Aldrich
Acetonitrilo, ACS reagent, ≥99.5%
Sigma-Aldrich
2-Propanol, HPLC Plus, for HPLC, GC, and residue analysis, 99.9%
Sigma-Aldrich
Acetonitrilo, for HPLC, for UV, ≥99.9% (GC)
Sigma-Aldrich
Cloruro de sodio, for molecular biology, DNase, RNase, and protease, none detected, ≥99% (titration)
Sigma-Aldrich
Alcohol isopropílico, meets USP testing specifications
Sigma-Aldrich
Acetonitrilo, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Sulfato de magnesio, anhydrous, reagent grade, ≥97%
Sigma-Aldrich
Hexano, Laboratory Reagent, ≥95%
Sigma-Aldrich
Metanol, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
Sodium chloride solution, 5 M in H2O, BioReagent, for molecular biology, suitable for cell culture
Sigma-Aldrich
Sodium chloride solution, 0.9% in water, BioXtra, suitable for cell culture
Sigma-Aldrich
Hexano, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99% (GC)
Sigma-Aldrich
Cloruro de sodio, BioReagent, suitable for cell culture, suitable for insect cell culture, suitable for plant cell culture, ≥99%
Sigma-Aldrich
Hexano, HPLC Plus, for HPLC, GC, and residue analysis, ≥95%
Sigma-Aldrich
2-Propanol, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
Metanol, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)