Saltar al contenido
Merck

A new look at old agents for pleurodesis: nitrogen mustard, sodium hydroxide, and silver nitrate.

Current opinion in pulmonary medicine (2000-07-27)
F S Vargas, A O Carmo, L R Teixeira
RESUMEN

In this review we analyze the evolution of pleurodesis. In spite of the fact that this procedure started in the beginning of the 20th century, the ideal sclerosing agent is not yet known. Emphasis is placed on the current tendency toward minimally invasive procedures in which insertion of catheters is favored over surgical procedures such as placement of chest tubes or thoracoscopy. Among the sclerosing agents, talc is preferred throughout the world. However, the possible development of acute respiratory distress syndrome, which is sometimes fatal, caused the awakening of interest in other drugs. Nitrogen mustard induces pleurodesis but causes important side effects. Sodium hydroxide and silver nitrate are effective and may be used in humans beings.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Hidróxido de sodio, ACS reagent, ≥97.0%, pellets
Sigma-Aldrich
Nitrato de plata, ACS reagent, ≥99.0%
Sigma-Aldrich
Hidróxido de sodio, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
Hidróxido de sodio solution, 50% in H2O
Sigma-Aldrich
Hidróxido de sodio solution, BioUltra, for molecular biology, 10 M in H2O
Sigma-Aldrich
Nitrato de plata, ReagentPlus®, ≥99.0% (titration)
Sigma-Aldrich
Hidróxido de sodio, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
Sigma-Aldrich
Hidróxido de sodio solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Hidróxido de sodio, puriss., meets analytical specification of Ph. Eur., BP, NF, E524, 98-100.5%, pellets
Sigma-Aldrich
Hidróxido de sodio, reagent grade, 97%, powder
Sigma-Aldrich
Hidróxido de sodio, pellets, semiconductor grade, 99.99% trace metals basis
Sigma-Aldrich
Hidróxido de sodio, puriss. p.a., ACS reagent, reag. Ph. Eur., K ≤0.02%, ≥98%, pellets
Sigma-Aldrich
Nitrato de plata, 99.9999% trace metals basis
Sigma-Aldrich
Hidróxido de sodio solution, 5.0 M
Sigma-Aldrich
Nitrato de plata, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8%
Sigma-Aldrich
Hidróxido de sodio, puriss. p.a., ACS reagent, K ≤0.02%, ≥98.0% (T), pellets
Sigma-Aldrich
Hidróxido de sodio, beads, 16-60 mesh, reagent grade, 97%
Sigma-Aldrich
Ascarite®, Sodium hydroxide-coated silica, 20-30 mesh
Sigma-Aldrich
Hidróxido de sodio, reagent grade, 97%, flakes
Sigma-Aldrich
Nitrato de plata, puriss. p.a., ≥99.5% (AT)
Sigma-Aldrich
Nitrato de plata, meets analytical specification of Ph. Eur., BP, USP, 99.8-100.5%
Sigma-Aldrich
Hidróxido de sodio, BioUltra, for luminescence, ≥98.0% (T), pellets
Sigma-Aldrich
Ascarite®, Sodium hydroxide-coated silica, 8-20 mesh
Sigma-Aldrich
Nitrato de plata, BioReagent, suitable for plant cell culture, >99% (titration)
Sigma-Aldrich
Nitrato de plata solution, 2.5 % (w/v) AgNO3 in H2O
Sigma-Aldrich
Hidróxido de sodio solution, purum, ≥32%
Supelco
Hidróxido de sodio solution, 0.1 M NaOH in water (0.1N), Eluent concentrate for IC
Sigma-Aldrich
Silver nitrate on silica gel, extent of labeling: ~10 wt. % loading, +230 mesh
Supelco
Hidróxido de sodio solution, 49-51% in water, eluent for IC
Sigma-Aldrich
Nitrato de plata, BioXtra, >99% (titration)