Saltar al contenido
Merck

503185

Supelco

Carbon Dioxide Trap

volume 100 cc, 1/8 in. fitting

Sinónimos:

CO2 TRAP 100CC, 1/8IN FITTINGS

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Número CE:
Código UNSPSC:
12000000
En este momento no podemos mostrarle ni los precios ni la disponibilidad

volumen

100 cc

Adaptador

1/8 in. fitting

¿Está buscando productos similares? Visita Guía de comparación de productos

Descripción general

Sodium hydroxide nonfibrous silicate material is universally accepted for its high absorptive capacity and indicating properties for carbon dioxide. Typically, this material will absorb 20-30% of its weight in carbon dioxide before replacement of the saturated material is required. As carbon dioxide is absorbed, the greenish-brown material turns white because of the formation of sodium carbonate. The trap body is constructed of borosilicate glass, and the fittings are nickel-plated and have sintered stainless steel frits.

A moisture trap should be installed downstream from this unit to absorb the moisture that is produced.

Note: Exercise extreme caution when refilling the trap due to the caustic nature of the absorbent.

Dimensions:
  • 100 cc Traps: 123/4 in. (32.4 cm) long x 13/4 in. (44 mm) diameter
  • 250 cc Traps: 171/2 in. (44.4 cm) long x 2 in. (51 mm) diameter

Aplicación

It may be used to connect combustion oven and GCMS separator, for transfer of the gas into MS inlet system which monitors isotope-ratio.[1]

Pictogramas

Corrosion

Palabra de señalización

Danger

Frases de peligro

Clasificaciones de peligro

Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1A

Código de clase de almacenamiento

8B - Non-combustible corrosive hazardous materials

Clase de riesgo para el agua (WGK)

WGK 3

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Equipo de protección personal

Eyeshields, Faceshields, Gloves, type P3 (EN 143) respirator cartridges


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documentos section.

Si necesita más asistencia, póngase en contacto con Atención al cliente

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Isotope-ratio-monitoring gas chromatography-mass spectrometry.
Matthews, D. E., and J. M. Hayes.
Analytical Chemistry, 50.11, 1465-1473 (1978)

Questions

1–2 of 2 Questions  
  1. When it means 1/8 fitting, does it mean I can connect it with a tube with internal diameter of 1/8 or the external diameter has to be 1/8?

    1 answer
    1. This is a Swagelok fitting and 1/8" refers to the external (outside) diameter of the copper or stainless steel tubing. Linked below is a connector that can be used. Please contact your local technical service group if you need more information on how to connect Swagelok fittings.
      https://www.sigmaaldrich.com/product/supelco/22014

      Helpful?

  2. Does the product include an indicator for the consumption of sodium oxides?

    1 answer
    1. Upon the absorption of CO2, the greenish-brown material turns white due to the formation of sodium carbonate. It is designed to remove CO2 from gases used in various applications, such as carbon-hydrogen determinations, analyses of respiratory gases, and especially in quantitative organic micro-analyses. The sodium hydroxide non-fibrous silicate trapping medium is widely recognized for its high absorptive capacity and indicating properties. Typically, this material will absorb 20-30% of its weight in carbon dioxide before replacement of the saturated material is required.

      Helpful?

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico