Saltar al contenido
Merck
Todas las fotos(1)

Documentos clave

Ver Toda la documentación

P3688

Sigma-Aldrich

Disolución salina tamponada con fosfato

powder, pH 7.4, contains BSA

Sinónimos:

PBS

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

Número MDL:
MFCD00131855
Código UNSPSC:
41105319
eCl@ss:
32129211
NACRES:
NA.25
En este momento no podemos mostrarle ni los precios ni la disponibilidad

Nombre del producto

Disolución salina tamponada con fosfato, pH 7.4, contains BSA, powder

Formulario

powder

contiene

BSA

pH

7.4

solubilidad

water: soluble

aplicaciones

diagnostic assay manufacturing

temp. de almacenamiento

2-8°C

¿Está buscando productos similares? Visita Guía de comparación de productos

Categorías relacionadas

Aplicación

Phosphate buffered saline has been used for the dilution of lyotrophic liquid crystals (LLC) containing solution for the release studies.[1] It has also been used as a blocking solution in enzyme linked immunosorbent assay (ELISA).[2][3]

Envase

Foil pouches

Reconstitución

Contents of one pouch, when dissolved in one liter of distilled or deionized water, will yield 0.01 M phosphate buffered saline (NaCl, 0.138 M; KCl, 0.0027 M); bovine serum albumin - 1% w/v, pH 7.4 at 25 °C.

Producto relacionado

Referencia del producto
Descripción
Precios

08168

Timestrip Plus™ 8 °C

Código de clase de almacenamiento

11 - Combustible Solids

Clase de riesgo para el agua (WGK)

WGK 3

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
0000388127
0000357826
0000366713
0000271642
0000388127

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Structural characterization of lyotropic liquid crystals containing a dendrimer for solubilization and release of gallic acid
Bitan-Cherbakovsky L, et al.
Colloids and Surfaces. B, Biointerfaces, 112, 87-95 (2013)
Determining in-field dispersal of the redbanded stink bug (Hemiptera: Pentatomidae) in soybean fields using a protein based mark-capture method
Bastola A and Davis JA
Crop Protection, 112, 24-32 (2018)
Discovery of antivirulence agents against methicillin-resistant Staphylococcus aureus
Khodaverdian V, et al.
Antimicrobial agents and chemotherapy, 57(8), 3645-3652 (2013)
Yong N Li et al.
The Journal of comparative neurology, 516(5), 442-453 (2009-08-06)
Horizontal cells (HCs) are involved in establishing the center-surround receptive field organization of photoreceptor and bipolar cells. In many species, HCs respond differentially to colors and may play a role in color vision. An earlier study from our laboratory suggested
S Vaddiraju et al.
Biosensors & bioelectronics, 24(6), 1557-1562 (2008-10-01)
The performance of an implantable glucose sensor is strongly dependent on the ability of their outer membrane to govern the diffusion of the various participating species. In this contribution, using a series of layer-by-layer (LBL) assembled outer membranes, the role
Ver todos los artículos relacionados

Protocolos

Immunohistochemistry Procedure

Use this protocol to for the entire immunohistochemistry (IHC) procedure through staining and visualization of specific antigens in paraffin-embedded tissue sections.

Contenido relacionado

Preparation & Staining of 3D Printed Tissues & Scaffolds

Three-dimensional (3D) printing of biological tissue is rapidly becoming an integral part of tissue engineering.

Questions

1–2 of 2 Questions  

  1. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  2. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico