Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf
1.05109
Fosfato de potasio dibasic
anhydrous 99.99 Suprapur®
Sinónimos:
Fosfato de dipotasio, Hidrogenofosfato de dipotasio, sec -Fosfato de potasio
About This Item
Productos recomendados
Nivel de calidad
descripción
for inorganic trace analysis
Ensayo
99.99%
Formulario
solid
potencia
8000 mg/kg LD50, oral (Rat)
pH
9 (20 °C, 10 g/L in H2O)
solubilidad
1600 g/L
densidad
2.44 g/cm3 at 20 °C
densidad aparente
700‑1000 kg/m3
temp. de almacenamiento
2-30°C
cadena SMILES
[K+].[K+].OP([O-])([O-])=O
InChI
1S/2K.H3O4P/c;;1-5(2,3)4/h;;(H3,1,2,3,4)/q2*+1;/p-2
Clave InChI
ZPWVASYFFYYZEW-UHFFFAOYSA-L
¿Está buscando productos similares? Visita Guía de comparación de productos
Categorías relacionadas
Aplicación
- beta-lactoglobulin stabilized nanemulsions--Formulation and process factors affecting droplet size and nanoemulsion stability.: This study investigates the impact of formulation and process parameters on the stability and size of beta-lactoglobulin stabilized nanemulsions, potentially involving potassium phosphate dibasic in the formulation process (Ali et al., 2016).
- Correlation of characteristics of gel extrusion module (GEM) tablet formulation and drug dissolution rate.: Examines how the characteristics of gel extrusion in tablet formulations influence drug dissolution rates, relevant for chemists looking into dissolution behavior and possibly involving potassium phosphate dibasic (Juang and Storey, 2003).
- High-performance liquid chromatographic determination of phenylureas by photochemically-induced fluorescence detection.: Discusses a method for detecting phenylureas using high-performance liquid chromatography, which could involve potassium phosphate dibasic as a component of the mobile phase or sample preparation (Munoz de la Pena et al., 2002).
- Assay and purity analysis of diatrizoate sodium in drug product by LC.: This research details a method for assaying and analyzing the purity of diatrizoate sodium, where potassium phosphate dibasic could be part of the chromatographic system (Chellquist et al., 1997).
Nota de análisis
Assay (acidimetric): ≥ 99.5 %
Specific absorbance (at 260 nm; 10 %; 2 cm; water): ≤ 0.010
Chloride (Cl): ≤ 5 ppm
Sulfate (SO₄): ≤ 30 ppm
As (Arsenic): ≤ 0.1 ppm
Ba (Barium): ≤ 5.00 ppm
Ca (Calcium): ≤ 0.50 ppm
Cd (Cadmium): ≤ 0.005 ppm
Ce (Cerium): ≤ 0.010 ppm
Co (Cobalt): ≤ 0.010 ppm
Cu (Copper): ≤ 0.005 ppm
Eu (Europium): ≤ 0.010 ppm
Fe (Iron): ≤ 0.100 ppm
Hg (Mercury): ≤ 0.05 ppm
La (Lanthanum): ≤ 0.010 ppm
Mg (Magnesium): ≤ 0.50 ppm
Mn (Manganese): ≤ 0.010 ppm
Na (Sodium): ≤ 50 ppm
Ni (Nickel): ≤ 0.010 ppm
Pb (Lead): ≤ 0.005 ppm
Sm (Samarium): ≤ 0.010 ppm
Sr (Strontium): ≤ 0.50 ppm
Tl (Thallium): ≤ 0.01 ppm
Y (Yttrium): ≤ 0.010 ppm
Yb (Ytterbium): ≤ 0.010 ppm
Zn (Zinc): ≤ 0.010 ppm
Información legal
Código de clase de almacenamiento
13 - Non Combustible Solids
Clase de riesgo para el agua (WGK)
WGK 1
Punto de inflamabilidad (°F)
Not applicable
Punto de inflamabilidad (°C)
Not applicable
Certificados de análisis (COA)
Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
-
How is shipping temperature determined? And how is it related to the product storage temperature?
1 answer-
Helpful?
-
-
How can I determine the shelf life / expiration / retest date of this product?
1 answer-
If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdfHelpful?
-
Active Filters
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico
