MT51344030
Mettler-Toledo InLab® 751 micro conductivity probe
for conductivity measurements in life sciences
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
About This Item
Código UNSPSC:
39121436
NACRES:
NB.79
En este momento no podemos mostrarle ni los precios ni la disponibilidad
Productos recomendados
descripción
Temperature probe NTC 30 kOhm
Mini-DIN connector
cell constant: 1.0 /cm.
fabricante / nombre comercial
Mettler-Toledo 51344030
intervalo de medición de la temperatura
0-100 °C
L × diám.
120 mm × 4 mm
cable L
1 m
Descripción general
The InLab®751 Micro features an integrated temperature probe that automatically captures the sample temperature and corrects results to a defined reference temperature with a shaft diameter of 4 mm.
For correct results, immerse the sensor to the minimum immersion level marked on the probe. Recommended for conductivity measurements in life sciences.
The InLab®751 Micro is especially designed for the measurement in small containers. Thanks to its shaft diameter of 4 mm you will get accurate results in low sample volumes as small as 150 μL.
With a measuring range of 10 μS/cm to 100 mS/cm the InLab®751 Micro covers the conductivity range typically used in the life sciences.
The integrated temperature sensor does away with the need for a separate temperature probe by compensating for the difference in temperature between the sample and reference temperature.
For correct results, immerse the sensor to the minimum immersion level marked on the probe. Recommended for conductivity measurements in life sciences.
The InLab®751 Micro is especially designed for the measurement in small containers. Thanks to its shaft diameter of 4 mm you will get accurate results in low sample volumes as small as 150 μL.
With a measuring range of 10 μS/cm to 100 mS/cm the InLab®751 Micro covers the conductivity range typically used in the life sciences.
The integrated temperature sensor does away with the need for a separate temperature probe by compensating for the difference in temperature between the sample and reference temperature.
- 4 mm shaft diameter
- Indicated minimum immersion depth on sensor shaft
- 2 platinum poles
- Integrated NTC 30 kΩ temperature sensor
Información legal
InLab is a registered trademark of Mettler-Toledo, Inc.
Elija entre una de las versiones más recientes:
Certificados de análisis (COA)
Lot/Batch Number
It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documentos section.
Si necesita más asistencia, póngase en contacto con Atención al cliente
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Active Filters
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico
