901975
SunTronic® silver nanoparticle ink for inkjet printing
sintering temperature 100 - 150°C
Sinónimos:
Ag ink, Conductive ink, Silver ink, SunTronic®EMD5800
About This Item
Productos recomendados
description
Silver content: 45-50%
Sintering temperature: 100 - 150°C for 10 – 60 min
Solid content: 48-52%
Volume Resistivity: 5 – 25 uΩcm
form
liquid
surface tension
25-28 dyn/cm
viscosity
6-8 cP (Brookfield)
storage temp.
2-8°C
¿Está buscando productos similares? Visita Guía de comparación de productos
General description
EMD5800 is oil-based nanoparticle inks which demonstrates superior conductivity at low sintering temperatures with stable jetting performance and adhesion to temperature sensitive plastics.
It can be used in the manufacture of touch panel displays, printed RFID antennae, smart cards, sensors, security labels, touch switches and other printed electronics applications.
Caution
EMD5800 is supplied as ready-to-use oil based inks, and can be printed on various deposition printers and jetted on through various piezo DOD inkjet printheads suitable for oil based inks, although full printhead compatibility will need to be verified in each case
Sintering conditions may change for different ink film thicknesses. Typical sintering temperature may range from 100-200°C depending on temperature tolerance of the substrate. Sintering time may range from 10-60 minutes. Electrical resistance may be reduced with higher sintering temperature and/or longer sintering times.
Refrigerated storage at a temperature of 5-15°C is recommended. Agitation after refrigeration to assure proper dispersion is recommended.
Legal Information
signalword
Danger
hcodes
Hazard Classifications
Aquatic Acute 1 - Aquatic Chronic 1 - Asp. Tox. 1 - Eye Dam. 1 - Skin Corr. 1B - STOT RE 2 Oral
target_organs
Gastrointestinal tract,Liver,Immune system
Storage Class
8A - Combustible corrosive hazardous materials
wgk_germany
WGK 3
flash_point_f
156.2 °F
flash_point_c
69 °C
Elija entre una de las versiones más recientes:
Certificados de análisis (COA)
¿No ve la versión correcta?
Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
Artículos
Small molecular weight organic semiconductors are promising for flexible transistor applications in next-gen soft electronics.
Professors Tokito and Takeda share design principles and optimization protocols for organic electronic devices, focusing on flexibility and low cost.
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico