Saltar al contenido
Merck
Todas las fotos(1)

Documentos clave

Ver Toda la documentación

651826

Sigma-Aldrich

Chromium etchant

standard

Sinónimos:

Cr etching solution

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización

Seleccione un Tamaño

500 ML
US$ 162,00

US$ 162,00

PRECIOS SIN IMPUESTOS NACIONALES
Check Cart for Availability
Solicitar un pedido a granel
Todas las fotos(1)

Seleccione un Tamaño

Cambiar Vistas
500 ML
US$ 162,00

About This Item

Número MDL:
MFCD07370678
Código UNSPSC:
12352300
NACRES:
NA.23

US$ 162,00

PRECIOS SIN IMPUESTOS NACIONALES
Check Cart for Availability
Solicitar un pedido a granel

grado

standard

Nivel de calidad

100

composición

volatiles, 85%

color

orange

bp

100 °C/1 atm

densidad

1.16 g/mL at 25 °C

Categorías relacionadas

Descripción general

  • Appearance - Clear orange
  • pH - Acidic
  • Etch Rate at 40 °C - 40 Å/second
  • Etch Capacity (rate declines at ~70%) - 65 g/gallon
  • Shelf Life - 1 year
  • Storage Conditions - Ambient
  • Filtration - 0.2 µm
  • Recommended Operating Temperatures - 20-80 °C (30-40 °C most common)
  • Rinse - Deionized water
  • Photoresist Recommendations - KLT6000 Series, KLT 5300 Series, HARE SQT (SU-8 type), TRANSIST, or PKP -308PI
  • Select Compatible Materials - Au, Ti, oxide, nitride, Si
  • Select Incompatible Materials - Al, Ni, Cu, NiCr
  • Compatible Plastics - HDPE, PP, PTFE, PFA, PVC
  • Isotropy - Isotropic
  • Incompatible Chemicals - Strong bases
Ceric ammonium nitrate-based etchant. Etch rate of 40 Å/sec @ room temp. Etches cleanly with only a deionized water rinse needed.
Chromium etchant is a chromium based solution that removes the excess metal from the substrate. These etchants are majorly used in metal finishing and electronic industry. It has an etch rate of 4 mm/s and can be used to etch nickel, copper, and chromium based excess metals.[1][2][3][4]
Our chromium etchant is high purity ceric ammonium nitrate system for precise, clean etching of chromium and chromium oxide films. Compatible with positive and negative photoresists. Our chromium etchant is filtered to remove all particulates above 0.2 microns. Etching temperature varies depending on film thickness. Etch times range from 15 seconds to 60 seconds at room temperature. Chromium Etchants should be operated in a well-ventilated hood.

Aplicación

For use at room temperature or elevated temperature. Etches cleanly, eliminating need for an intermediate rinse. Etching temperature varies with regard to film thickness. Etch times range from 15 to 60 seconds at room temperature. Note, chromium etchants should be handled in a well ventilated hood.
The product can etch Al, Cr, Cu, Ni, GaAs. It can surface oxidize Si, Ta/TaN, however, it has no effect on Au, Si3N4, SiO2, Ti, and W surfaces[5]

Características y beneficios

Designed for precise, clean etching of chromium and chromium oxide films. Compatible with both positive and negative photoresists. Filtered to 0.2 micron to remove particlulates.

Palabra de señalización

Danger

Frases de peligro

H272,H290,H314,H317,H411

Clasificaciones de peligro

Aquatic Chronic 2 - Eye Dam. 1 - Met. Corr. 1 - Ox. Liq. 2 - Skin Corr. 1B - Skin Sens. 1

Riesgos supl.

EUH071

Código de clase de almacenamiento

5.1B - Oxidizing hazardous materials

Clase de riesgo para el agua (WGK)

WGK 3

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
MKCW6429
MKCV2641
MKCT6171
MKCS3415
MKCQ5677

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Fabrication and Mechanical Properties Measurements of 3D Microtissues for the Study of Cell-Matrix Interactions.
The Surfaceome, 120(5), 303-328 (2018)
The regeneration and recycle of chromium etching solutions using concentrator cell membrane technology.
Chaudhary AJ, et al.
Chemosphere, 62(5), 841-846 (2006)
Reconstituting Functional Microtubule-Barrier Interactions.
Methods in Cell Biology, 120(5), 69-90 (2014)
Irene Dolado et al.
Advanced materials (Deerfield Beach, Fla.), 32(9), e1906530-e1906530 (2020-01-25)
Van der Waals (vdW) materials host a variety of polaritons, which make them an emerging material platform for manipulating light at the nanoscale. Due to the layered structure of vdW materials, the polaritons can exhibit a hyperbolic dispersion and propagate
Thermoelectric microconverter for energy harvesting systems.
Carmo J, et al.
IEEE Transactions on Industrial Electronics, 57(3), 861-867 (2010)
Ver todos los artículos relacionados

Protocolos

Negative Photoresist Procedure

Photoresist kit offers pre-weighed chemical components for lithographic processes, with separate etchants for various substrate choices.

Questions

1–3 of 3 Questions  

  1. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  2. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  3. Does this product etch Ti and TiO2? If so, what is the etch rate?

    1 answer

    1. The chromium etchant, product 651826, is compatible with titanium, meaning it does not etch titanium. While there is no specific information on TiO2, it is assumed that the same is true. The etch rate at 40°C is 40 Å/sec, and the rate will approximately double with every 10°C increase in temperature. Additionally, the rate of stirring or agitation will also increase the etch rate.

      Helpful?

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico