Skip to Content
Merck
  • Air to lung partition coefficients for volatile organic compounds and blood to lung partition coefficients for volatile organic compounds and drugs.

Air to lung partition coefficients for volatile organic compounds and blood to lung partition coefficients for volatile organic compounds and drugs.

European journal of medicinal chemistry (2007-06-05)
Michael H Abraham, Adam Ibrahim, William E Acree
ABSTRACT

Values of in vitro gas to lung partition coefficients, K(lung), of VOCs have been collected from the literature. For 44 VOCs, application of the Abraham solvation equation to log K(lung) yielded a correlation with R(2)=0.968 and S.D.=0.25 log units. Combination of the log K(lung) values with log K(blood) values leads to in vitro blood to lung partition coefficients, log P(lung) for 43 VOCs; an Abraham solvation equation correlated these values with a very poor R(2)=0.262 but with a very good S.D.=0.190 log units. Values of in vivo log P(lung) for 80 drugs were collected, and were correlated with R(2)=0.647 and S.D.=0.51 log units. When the log P(lung) values for VOCs and drugs were combined, an Abraham solvation equation could correlate the 123 compounds with R(2)=0.676 and S.D.=0.43 log units. Division of the 123 compounds into a training set and a test set, showed that the training equation could predict log P(lung) values with an average error of 0.001 and a standard deviation of 0.44 log units; for drugs in the combined test set the average error was 0.02 and the standard deviation 0.43 log units.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
2-Butanone, FCC, FG
Sigma-Aldrich
Isobutyl alcohol, ≥99%, FCC, FG
Supelco
Benzene, analytical standard
Supelco
Dichloromethane, Selectophore, ≥99.5%
Sigma-Aldrich
Ethanol, purum, secunda spirit, denaturated with 2% 2-butanone, S15, ~96% (based on denaturant-free substance)
Supelco
Dichloromethane, ≥99.9%
Sigma-Aldrich
Isobutyl alcohol, natural, ≥99%, FCC, FG
Sigma-Aldrich
(±)-Thiopental
Sigma-Aldrich
2-Propanol, HPLC Plus, for HPLC, GC, and residue analysis, 99.9%, poly coated bottles
Sigma-Aldrich
1,3-Butadiene solution, 15 wt. % in hexane
Sigma-Aldrich
Ethanol, tested according to Ph. Eur.
Sigma-Aldrich
1,3-Butadiene solution, 20 wt. % in toluene
Sigma-Aldrich
Dichloromethane, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 50-150 ppm amylene as stabilizer
Sigma-Aldrich
Hexane, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99% (GC)
Sigma-Aldrich
Hexane, suitable for HPLC, ≥97.0% (GC)
Sigma-Aldrich
2-Butanone, ACS reagent, ≥99.0%
Sigma-Aldrich
18β-Glycyrrhetinic acid, 97%
Supelco
Toluene, analytical standard
Sigma-Aldrich
Toluene, suitable for HPLC, 99.9%
Sigma-Aldrich
Toluene, anhydrous, 99.8%
Sigma-Aldrich
Toluene, ACS reagent, ≥99.5%
Sigma-Aldrich
Toluene, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%
Sigma-Aldrich
Nalidixic acid, ≥98%
Sigma-Aldrich
Methylcyclopentane, 97%
Sigma-Aldrich
4-Chlorobenzotrifluoride, 98%
Sigma-Aldrich
2-Propanol, suitable for HPLC, 99.9%
Sigma-Aldrich
2-Propanol, anhydrous, 99.5%
Sigma-Aldrich
2-Propanol, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
2-Propanol, ACS reagent, ≥99.5%
Sigma-Aldrich
2-Methylpentane, ≥99%