503207

Piège à dioyde de carbone

volume 250 cc, 1/8 in. fitting

• Synonyme(s) : PIÈGE À CO2, 250 CC, RACCORDS 1/8”
• Numéro CE : 215-185-5
• Code UNSPSC : 12000000

Propriétés

• Volume: 250 cc
• Raccords: 1/8 in. fitting

Description

Description générale

Sodium hydroxide nonfibrous silicate material is universally accepted for its high absorptive capacity and indicating properties for carbon dioxide. Typically, this material will absorb 20-30% of its weight in carbon dioxide before replacement of the saturated material is required. As carbon dioxide is absorbed, the greenish-brown material turns white because of the formation of sodium carbonate. The trap body is constructed of borosilicate glass, and the fittings are nickel-plated and have sintered stainless steel frits.

A moisture trap should be installed downstream from this unit to absorb the moisture that is produced.

Note: Exercise extreme caution when refilling the trap due to the caustic nature of the absorbent.

Dimensions:

• 100 cc Traps: 123/4 in. (32.4 cm) long x 13/4 in. (44 mm) diameter
• 250 cc Traps: 171/2 in. (44.4 cm) long x 2 in. (51 mm) diameter

Informations sur la sécurité

• Pictogrammes: GHS05
• Mention d'avertissement: Danger
• Mentions de danger: H290,H314
• Conseils de prudence: P234 - P260 - P280 - P303 + P361 + P353 - P304 + P340 + P310 - P305 + P351 + P338
• Classification des risques: Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1A
• Code de la classe de stockage: 8B - Non-combustible corrosive hazardous materials
• Classe de danger pour l'eau (WGK): WGK 3
• Point d'éclair (°F): Not applicable
• Point d'éclair (°C): Not applicable
• Équipement de protection individuelle: Eyeshields, Faceshields, Gloves, type P3 (EN 143) respirator cartridges