跳轉至內容
Merck
  • Using contemporary liquid chromatography theory and technology to improve capillary gradient ion-exchange separations.

Using contemporary liquid chromatography theory and technology to improve capillary gradient ion-exchange separations.

Journal of chromatography. A (2014-12-03)
Bert Wouters, Ken Broeckhoven, Sam Wouters, Cees Bruggink, Yury Agroskin, Christopher A Pohl, Sebastiaan Eeltink
摘要

The gradient-performance limits of capillary ion chromatography have been assessed at maximum system pressure (34.5 MPa) using capillary columns packed with 4.1 μm macroporous anion-exchange particles coated with 65 nm positively-charged nanobeads. In analogy to the van-Deemter curve, the gradient performance was assessed applying different flow rates, while decreasing the gradient time inversely proportional to the increase in flow rate in order to maintain the same retention properties. The gradient kinetic-performance limits were determined at maximum system pressure, applying tG/t0=5, 10, and 20. In addition, the effect of retention on peak width was assessed in gradient mode for mono-, di-, and trivalent inorganic anions. The peak width of late-eluting ions can be significantly reduced by using concave gradient, resulting in better detection sensitivity. A signal enhancement factor of 8 was measured for a late-eluting ion when applying a concave instead of a linear gradient. For the analysis of a complex anion mixture, a coupled column with a total length of 1.05 m was operated at the kinetic-performance limit applying a linear 250 min gradient (tG/t0=10). The peak capacity varied between 200 and 380 depending on analyte retention, and hence on charge and size of the ion.

材料
產品編號
品牌
產品描述

Sigma-Aldrich
三氟乙酸, ReagentPlus®, 99%
Sigma-Aldrich
三氟乙酸, suitable for HPLC, ≥99.0%
Sigma-Aldrich
甲酸, reagent grade, ≥95%
Sigma-Aldrich
溴化钾, FT-IR grade, ≥99% trace metals basis
Sigma-Aldrich
甲酸, ACS reagent, ≥96%
Sigma-Aldrich
甲酸, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥98%
Sigma-Aldrich
三氟乙酸, puriss. p.a., suitable for HPLC, ≥99.0% (GC)
Sigma-Aldrich
硫代硫酸钠, ReagentPlus®, 99%
Sigma-Aldrich
碘化钠, ACS reagent, ≥99.5%
Sigma-Aldrich
甲酸, puriss., meets analytical specifications of DAC, FCC, 98.0-100%
Sigma-Aldrich
硫代硫酸钠, purum p.a., anhydrous, ≥98.0% (RT)
Sigma-Aldrich
碘化钠, ReagentPlus®, ≥99%
Sigma-Aldrich
草酸, 98%
Sigma-Aldrich
三氯乙酸 溶液, 6.1 N
Sigma-Aldrich
溴化钾, ACS reagent, ≥99.0%
Sigma-Aldrich
甲酸, ACS reagent, ≥88%
Sigma-Aldrich
三氟乙酸, ≥99%, for protein sequencing
Sigma-Aldrich
丙酸, ≥99.5%
Sigma-Aldrich
丁酸, ≥99%
Sigma-Aldrich
钼酸钠, ≥98%
Sigma-Aldrich
草酸, ReagentPlus®, ≥99%
Sigma-Aldrich
DL-苹果酸, ReagentPlus®, ≥99%
Sigma-Aldrich
苯乙酸, 99%
Sigma-Aldrich
溴化钾, anhydrous, free-flowing, Redi-Dri, ACS reagent, ≥99%
Sigma-Aldrich
碘化钠, 99.999% trace metals basis
Sigma-Aldrich
硫代硫酸钠, ≥99.99% trace metals basis
Sigma-Aldrich
D-(-)-酒石酸, ReagentPlus®, 99%
Sigma-Aldrich
三氯乙酸, ACS reagent, ≥99.0%
Sigma-Aldrich
异丁酸, 99%
Sigma-Aldrich
草酸, purified grade, 99.999% trace metals basis