推薦產品
等級
spectrophotometric grade
蒸汽密度
2.48 (vs air)
蒸汽壓力
26.98 psi ( 55 °C)
8.4 psi ( 20 °C)
化驗
≥99%
形狀
liquid
自燃溫度
500 °F
expl. lim.
~8.3 %
技術
UV/Vis spectroscopy: suitable
雜質
<0.010% water
蒸發殘留物
<0.0003%
折射率
n20/D 1.358 (lit.)
bp
35-36 °C (lit.)
mp
−130 °C (lit.)
密度
0.626 g/mL at 25 °C (lit.)
&lambda ;
H2O reference
紫外吸收
λ: 195 nm Amax: 1.00
λ: 200 nm Amax: 0.60
λ: 210 nm Amax: 0.30
λ: 220 nm Amax: 0.06
λ: 245-400 nm Amax: 0.01
SMILES 字串
CCCCC
InChI
1S/C5H12/c1-3-5-4-2/h3-5H2,1-2H3
InChI 密鑰
OFBQJSOFQDEBGM-UHFFFAOYSA-N
尋找類似的產品? 前往 產品比較指南
一般說明
Pentane (n-pentane) undergoes hydroisomerization in the presence of nanocrystalline beta (BEA) zeolite. It has been reported as one of the products formed from the peroxidation of unsaturated fatty acid. It isomerizes to iso-pentane in the presence of ZSM-5 (Zeolite Socony Mobil-5) zeolite catalysts under hydrogen and nitrogen atmosphere.
Pentane is a low boiling solvent, which finds applications in industries as a petroleum solvent and as a substitute for diethyl ether.
Pentane is a low boiling solvent, which finds applications in industries as a petroleum solvent and as a substitute for diethyl ether.
訊號詞
Danger
危險分類
Aquatic Chronic 2 - Asp. Tox. 1 - Flam. Liq. 2 - STOT SE 3
標靶器官
Central nervous system
安全危害
儲存類別代碼
3 - Flammable liquids
水污染物質分類(WGK)
WGK 2
閃點(°F)
-40.0 °F
閃點(°C)
-40 °C
分析證明 (COA)
輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號,寫有 ‘Lot’或‘Batch’.。
客戶也查看了
Solvent Recovery Handbook (2002)
Hydroisomerization of n-pentane over hybrid catalysts containing a supported hydrogenation catalyst.
Applied Catalysis A: General, 91(2), 81-86 (1992)
Langmuir : the ACS journal of surfaces and colloids, 27(15), 9174-9181 (2011-07-01)
Graphene oxide (GO) can be viewed as an amphiphilic soft material, which form thin films at organic solvent-water interfaces. However, organic solvent evaporation provides little driving force, which results in slow GO transfer in aqueous phase, thus dawdling GO film
Journal of hazardous materials, 186(2-3), 1788-1793 (2011-01-18)
The solvents n-pentane, methylene dichloride, ethyl ether and dodecylbenzenesulphonic acid sodium were used to regenerate exhausted activated carbon used in the process of treating coking wastewater, and the efficiency, ability, and optimum conditions of the different solvents on this regeneration
Carbohydrate polymers, 92(1), 775-783 (2012-12-12)
Dry ultra-porous cellulose fibres were obtained using a liquid exchange procedure in which water was replaced in the following order: water, methanol, acetone, and finally pentane; thereafter, the fibres were dried with Ar(g). The dry samples (of TEMPO-oxidized dissolving pulp)
我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務