跳轉至內容
Merck
全部照片(1)

Key Documents

SGW2A47FH3

Millipore

Polysep II 1.0/1.2 µm 标称, Opticap® 囊式

filtration area 17.7 cm2, OptiScale® 47, pore size 1.2/1.0 μm

同義詞:

Optiscale Capsule Polysep II 1.0/1.2 μm 3/4 in. TC-1/4 in. HB

登入查看組織和合約定價


About This Item

分類程式碼代碼:
23151806
eCl@ss:
32031690

材料

PVDF vent cap
borosilicate glass fiber (BGF) membrane
fluoroelastomer FKM seal
mixed cellulose esters (MCE) membrane
polycarbonate
polypropylene support

品質等級

法律遵循

meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)

無菌

non-sterile

滅菌相容性

autoclavable compatible

產品線

OptiScale® 47

特點

hydrophilic

製造商/商標名

OptiScale®

參數

25 °C max. inlet temp.
5.5 bar max. inlet pressure (80 psi) at 25 °C
80 psig max. inlet pressure

技術

prefiltration: suitable

直徑

6.9 cm (2.7 in.)

過濾面積

17.7 cm2

入口接頭直徑

3/4 in.

出口接頭直徑

1/4 in.

雜質

≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)

基質

Polysep II

pore size

1.0/1.2 μm nominal pore size
1.2/1.0 μm pore size

輸入

sample type liquid

接頭

inlet sanitary flange
outlet hose barb
(19 mm (3/4 in.) Sanitary Flange Inlet and 6 mm (1/4 in.) Hose Barb Outlet)

尋找類似的產品? 前往 產品比較指南

一般說明

Device Configuration: 取样皿滤膜

特點和優勢

Format: Double Layer

其他說明

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Directions for Use

  • Organism Retention: Bacterial
  • Mode of Action: Filtration (size exclusion)
  • Application: Protein purification
  • Intended Use: Reduction or removal of microorganism/bioburden
  • Instructions for Use: Please refer installation and wetting sections of OPTISCALE®-25 user guide
  • Storage Statement: Please refer OPTISCALE®-25 user guide
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

準備報告

Sterilization Method
3 autoclave cycles of 60 min @ 121 °C; not in-line steam sterilizable

分析報告

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL

法律資訊

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany
Polysep is a trademark of Sigma-Aldrich Co. LLC

未找到適合的產品?  

試用我們的產品選擇工具.

象形圖

Health hazard

訊號詞

Danger

危險聲明

危險分類

Carc. 1B Inhalation

儲存類別代碼

4.1B - Flammable solid hazardous materials

水污染物質分類(WGK)

WGK 2


分析證明 (COA)

輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號,寫有 ‘Lot’或‘Batch’.。

已經擁有該產品?

您可以在文件庫中找到最近購買的產品相關文件。

存取文件庫

我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.

聯絡技術服務