跳轉至內容
Merck
全部照片(1)

文件

KGW9A2ZTT1

Millipore

Polysep II 2.0/1.2 µm nominal, Opticap® XLT Capsule

pore size 2.0/1.2 μm, Opticap® XLT 20, cartridge nominal length 20 in. (50 cm)

登入查看組織和合約定價


About This Item

分類程式碼代碼:
23151806

材料

borosilicate glass fiber (BGF) membrane
mixed cellulose esters (MCE) membrane
polypropylene filter
polypropylene housing
polypropylene support
silicone seal

品質等級

法律遵循

FDA 21CFR177-182 (all component materials)

無菌

non-sterile

滅菌相容性

autoclavable compatible

產品線

Opticap® XLT 20

特點

hydrophilic

製造商/商標名

Opticap®

參數

1 bar max. inlet pressure (15 psi) at 80 °C
2.75 bar max. inlet pressure (40 psi) at 60 °C
25 °C max. inlet temp.
3.5 bar max. differential pressure (50 psid) at 25 °C
5.5 bar max. inlet pressure (80 psi) at 23 °C
80 psig max. inlet pressure

技術

prefiltration: suitable

柱標稱長度

20 in. (50 cm)

設備尺寸

20 in.

入口接頭直徑

1-1/2 in.

出口接頭直徑

1-1/2 in.

雜質

≤0.5 EU/mL bacterial endotoxins (LAL test, aqueous extraction)
<0.5 EU/mL bacterial endotoxins (LAL test, sample aqueous extraction)

基質

Polysep II

pore size

2.0/1.2 μm nominal pore size
2.0/1.2 μm pore size

接頭

(38 mm (1 1/2 in.) Sanitary Flange Inlet and Outlet)

尋找類似的產品? 前往 產品比較指南

一般說明

Device Configuration: Capsule

特點和優勢

Double Layer

包裝

Double Easy-Open bag

準備報告

Sterilization Method:
3 autoclave cycles of Sterilization Method: 30min at 121°C; not in-line steam sterilizable

This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21CFR210.3(b)(6).

分析報告

Gravimetric Extractables: ≤ 290 mg per capsule after a 10 L flush and 24 hours in water at controlled room temperature.

其他說明

Directions for Use:

  • Organism Retention: Microorganism
  • Mode of Action: Filtration (size exclusion)
  • Application: BioProcessing
  • Intended Use: Reduction or removal of microorganism/bioburden
  • Instructions for Use: Please refer first page of Visual Inspection Guide and introduction section of Mixed cellulose esters Tech Brief
  • Storage Statement: Please refer Mixed cellulose esters Tech Brief
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

法律資訊

OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany
Polysep is a trademark of Sigma-Aldrich Co. LLC

未找到適合的產品?  

試用我們的產品選擇工具.


分析證明 (COA)

輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號,寫有 ‘Lot’或‘Batch’.。

已經擁有該產品?

您可以在文件庫中找到最近購買的產品相關文件。

存取文件庫

我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.

聯絡技術服務