D030N0V03

Clarigard^® 筒式过滤器

nominal pore size 3.0 μm, cartridge nominal length × diam. 2 in. (75.0-78.0 mm) × 2.75 in. (70 mm)

• 分類程式碼代碼: 23151806

屬性

• 材料: polypropylene filter
• 品質等級: 400
• 特點: hydrophilic
• 製造商／商標名: Clarigard^®
• 參數: 4.8 bar max. differential pressure (70 psid) at 20 °C
• 柱標稱長度 × 直徑: 2 in. (75.0-78.0 mm) × 2.75 in. (70 mm)
• 雜質: ≤0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction)
• 重量法萃取物: ≤10 mg
• 孔徑: 3.0 μm nominal pore size; 3.0 μm pore size
• 輸入: sample type liquid
• 柱代碼: Code N (2-226; O-Ring)

描述

一般說明

Clarigard^® filters 99.99% retention characteristic makes them ideal for the protection of critical downstream process steps such as membrane filters or chromatography columns. The graded-density depth structure of Clarigard^® filter media provides maximum filtration capacity, and the polypropylene construction offers low extractable levels and broad chemical compatibility.

準備報告

Sterilization: May be autoclaved for 10 cycles of 30 minutes at 126 °C or steam sterilized for 10 cycles of 30 minutes at 126 °C or hot water sanitized at 80 °C maximum for 30 minutes.

分析報告

Gravimetric Extractables: After autoclaving and a 24-hour soak in ASTM^® Type 1 reagent grade water at controlled room temperature, meets the USP Oxidizable Substances Test requirements of <10 mg.

其他說明

Directions for Use:

• Organism Retention: 99.99% retention
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Bioborden reduction
• Instructions for Use: Please refer to the Polygard^® and Clarigard^® Cartidges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

法律資訊

ASTM is a registered trademark of American Society for Testing and Materials

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany