VPPH101NB1

Viresolve^® Pro Shield H

Virus prefilter, Viresolve^® Pro Shield H, Modus 1.1 format, filtration area 0.017 m²

• Synonym(s): Viresolve^® Pro Shield H Modus 1.1
• UNSPSC Code: 23151806
• eCl@ss: 32031690

Properties

• material: PVDF housing; polyethersulfone membrane; silicone O-ring; white device
• Quality Level: 400
• product line: EMPROVE^® Filter
• manufacturer/tradename: Viresolve^®
• parameter: 4.1 bar max. inlet pressure (60 psig)
• H: 5.92 cm (2.33 in.)
• L × W × H: 5.9 cm (2.3 in.) × 18.2 cm (7.3 in.) × 9.2 cm (3.6 in.)
• L: 18.62 cm (7.33 in.)
• W: 9.22 cm (3.63 in.)
• filtration area: 0.017 m²
• membrane nominal area: 0.017 m²
• weight: 0.37 kg (0.81 lb)
• impurities: <0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• fitting: 3/4 in. inlet/outlet sanitary fitting(s); 1/8 in. integrated vent hose barb (with double O-ring seal)

Description

General description

The Viresolve^® Pro Solution provides a comprehensive, flexible template solution for viral clearance within mAb and recombinant protein bioproduction. This proven viral clearance solution delivers the highest levels of retention assurance and productivity across a broad range of feed stream characteristics.

Viresolve Pro Modus Devices are typically used for filtration of pilot to mid-scale batch volumes of proteins. The Viresolve^® Pro Shield H Modus 1.1 offers a filtration area of 0.017 m² and has a primary use in small-scale studies/pilot processing.

Features and Benefits

• Pilot and mid scale manufacturing
• Three different size formats
• Fully self contained (hardware holder not required)
• Fully disposable single-use fluid path
• Devices 100% tested with air/water diffusion and Binary Gas Test
• Shield / Shield H 100% aerosol tested

Other Notes

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Preparation Note

This product was manufactured with materials that meet the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Storage and Stability

4°C - 30°C

Legal Information

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany

VIRESOLVE is a registered trademark of Merck KGaA, Darmstadt, Germany

Disclaimer

EMD Millipore Corporation certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.