1.16997

Total Hardness Test Strips, reflectometric

water hardness 0.1-30.0 °d, REFLECTOQUANT^®

• Synonym(s): Total Hardness chemical test strips, Total Hardness test strip for instrument reader
• UNSPSC Code: 41116116
• NACRES: NA.24

Properties

• product name: Total Hardness Test, reflectometric, water hardness 0.1-30.0 °d, for use with REFLECTOQUANT^®
• description: quantitative
• Quality Level: 100
• specific analyte(s): calcium, magnesium
• water hardness measuring range: 0.1-30.0 °d
• compatibility: RQflex^® 10 Plus; RQflex^® 10; RQflex^® 20; for use with REFLECTOQUANT^®
• detection method: reflectometric
• storage temp.: 15-25°C

Description

General description

Method: reflectometric with test strips 0.1 - 30.0 °d Reflectoquant^®

The Reflectoquant total hardness test strips can be used to measure water hardness. The hardness (total hardness) is due to its content of salts of the alkaline earth metals calcium, magnesium, strontium, and barium (“hardening constituents”, later compounds only in traces). The reaction zones of the test strip, which are impregnated with differing amounts of Titriplex III, assume a green to red color, depending on the hardness of the water sample. The color is then determined reflectometrically on the RQflex. For pre-testing a sample in an economic and quick way to check for nitrite interferences or to estimate the hardness and a possible dilution factor prior to using this quantitative method we recommend our semi-quantitative MQuant test strips for total hardness. Further quantitative determination methods can be found with our Spectroquant tests.

Analysis Note

function control: conforms
Assay
- standard 1:
3.1 - 3.9 °d
- standard 2: 8.8 - 10.8 °d
- standard 3: 22.7 - 27.7 °d

Legal Information

REFLECTOQUANT is a registered trademark of Merck KGaA, Darmstadt, Germany

RQFLEX is a registered trademark of Merck KGaA, Darmstadt, Germany

Safety Information

• Storage Class Code: 11 - Combustible Solids
• WGK: WGK 1