Skip to Content
Merck
All Photos(2)

Documents

427152

Sigma-Aldrich

Poly(vinylidene fluoride)

average Mw ~180,000 by GPC, average Mn ~71,000, beads or pellets

Synonym(s):

PVDF

Sign Into View Organizational & Contract Pricing
All Photos(2)

About This Item

Linear Formula:
(CH2CF2)n
CAS Number:
24937-79-9
MDL number:
MFCD00084470
UNSPSC Code:
12162002
PubChem Substance ID:
24866740
NACRES:
NA.23

vapor pressure

15 mmHg ( 32 °C)

form

beads or pellets

melt index

20-35 g/10 min (230°C/3.8kg)

mol wt

average Mn ~71,000
average Mw ~180,000 by GPC

impact strength

2-4 ft-lb/in. (Izod, ASTM D 256, notched)

dielectric constant

8.0-9.5, 100 Hz (ASTM D 150)

hardness

76-80 (Shore D, ASTM D 2240)

refractive index

n20/D 1.42

ASTM D 3835

6,000-7,500 poise(230 °C) (100 sec-1)(lit.)

transition temp

brittleness temperature -62 °C (ASTM D 746)
Tm 155-165 °C

solubility

some polar solvents such as organic esters and amines: soluble

density

1.78 g/mL at 25 °C

SMILES string

FC(F)=C

InChI

1S/C2H2F2/c1-2(3)4/h1H2

InChI key

BQCIDUSAKPWEOX-UHFFFAOYSA-N

Looking for similar products? Visit Product Comparison Guide

Application

Coatings, film, filter cloth, instrument linings, filtration membranes, pump parts and linings and valves.

Features and Benefits

Crystallizes in at least 3 forms, depending on crystallization conditions. High mechanical strength,abrasion resistance and dielectric strength. Resists most chemicals, UV radiation, weathering and fungi.

Storage Class Code

11 - Combustible Solids

WGK

WGK 3

Flash Point(F)

Not applicable

Flash Point(C)

Not applicable

Personal Protective Equipment

dust mask type N95 (US), Eyeshields, Gloves

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Find documentation for the products that you have recently purchased in the Document Library.

Visit the Document Library

Customers Also Viewed

Slide 1 of 4

1 of 4

Polyvinylidenefluoride (PVDF), granule, 5 mm nominal granule size, weight 200 g, condition additive free polymer

GF06449283

Polyvinylidenefluoride

Polyvinylfluoride (PVF), film, thickness 0.013 mm, L 0.5 m, coil width 300 mm

GF86909787

Polyvinylfluoride

Polyvinylfluoride (PVF), film, thickness 0.05 mm, L 0.5 m

GF74516766

Polyvinylfluoride

Polyvinylidenefluoride (PVDF), film, thickness 0.0045 mm, size 150 × 150 mm, condition biaxially oriented

GF43004854

Polyvinylidenefluoride

Alois K Dexl et al.
Journal of cataract and refractive surgery, 38(10), 1808-1816 (2012-08-28)
To evaluate change in reading performance parameters after monocular Kamra corneal inlay implantation for the surgical correction of presbyopia. University surgical outpatient center. Prospective interventional case series. A corneal inlay was implanted in the nondominant eye. Naturally emmetropic and presbyopic
Evaluation of a commercially available polyvinylidene fluoride membrane filtration system for water decontamination.
M R Francis et al.
Indian journal of medical microbiology, 31(1), 97-98 (2013-03-20)
Christian M Coviello et al.
IEEE transactions on ultrasonics, ferroelectrics, and frequency control, 59(10), 2322-2330 (2012-11-13)
A new 2-D hydrophone array for ultrasound therapy monitoring is presented, along with a novel algorithm for passive acoustic mapping using a sparse weighted aperture. The array is constructed using existing polyvinylidene fluoride (PVDF) ultrasound sensor technology, and is utilized
Dongrui Wang et al.
ACS applied materials & interfaces, 4(11), 6273-6279 (2012-11-01)
In this work, two series of nanocomposites of poly(vinylidene fluoride) (PVDF) incorporated with reduced graphene oxide (rGO) and poly(vinyl alcohol)-modified rGO (rGO-PVA) were fabricated using solution-cast method and their dielectric properties were carefully characterized. Infrared spectroscopy and atom force microscope
Luminita Nicoleta Dumitrescu et al.
Molecules (Basel, Switzerland), 25(3) (2020-02-06)
Recent advancements in biomedicine have focused on designing novel and stable interfaces that can drive a specific cellular response toward the requirements of medical devices or implants. Among these, in recent years, electroactive polymers (i.e., polyvinylidene fluoride or PVDF) have
View All Related Papers

Articles

Electrospinning: Enabling Nanostructured Materials

Electrospinning technique applications discussed, emphasizing control of nanofibers and assembly into 3D architectures.

Electrospinning: Enabling Nanostructured Materials

Electrospinning technique applications discussed, emphasizing control of nanofibers and assembly into 3D architectures.

Electrospinning: Enabling Nanostructured Materials

Electrospinning technique applications discussed, emphasizing control of nanofibers and assembly into 3D architectures.

Electrospinning: Enabling Nanostructured Materials

Electrospinning technique applications discussed, emphasizing control of nanofibers and assembly into 3D architectures.

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service