推荐产品
等級
for GC derivatization
描述
Silyl reagent
包裝
pkg of 400 mL
濃度
5% dimethyldichlorosilane in toluene
SMILES 字串
C[Si](C)(Cl)Cl
InChI
1S/C2H6Cl2Si/c1-5(2,3)4/h1-2H3
InChI 密鑰
LIKFHECYJZWXFJ-UHFFFAOYSA-N
正在寻找类似产品? 访问 产品对比指南
一般說明
For deactivating glassware.
Treat the glass tubing that you use for columns with Sylon-CT solution (5% dimethyldichlorosilane in toluene). It deactivates the tubing for use up to 350 °C to 400 °C, far exceeding the capabilities of other deactivating agents used at room temperature. Sylon CT™ also deactivates transfer lines and glass or glass-lined injection port liners. Instructions included.
Treat the glass tubing that you use for columns with Sylon-CT solution (5% dimethyldichlorosilane in toluene). It deactivates the tubing for use up to 350 °C to 400 °C, far exceeding the capabilities of other deactivating agents used at room temperature. Sylon CT™ also deactivates transfer lines and glass or glass-lined injection port liners. Instructions included.
應用
Sylon CT™ was used as derivatizing agent, during an experiment to develop sensitive GC method for the identification and determination of long-chain primary alkyl amines.[1] It was also used for treating Erlenmeyer flasks to prevent mycelium from sticking to the glassware during development of techniques in the identification and partial characterization the chaxamycin biosynthesis gene cluster of S. leeuwenhoekii.[2]
法律資訊
Sylon CT is a trademark of Sigma-Aldrich Co. LLC
訊號詞
Danger
危險分類
Aquatic Chronic 3 - Asp. Tox. 1 - Eye Dam. 1 - Flam. Liq. 2 - Repr. 2 - Skin Corr. 1A - STOT RE 2 - STOT SE 3
標靶器官
Central nervous system
安全危害
儲存類別代碼
3 - Flammable liquids
水污染物質分類（WGK）
WGK 3
閃點（°F）
39.2 °F - closed cup
閃點（°C）
4 °C - closed cup
個人防護裝備
Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter
Peter Kusch et al.
Journal of chromatography. A, 1113(1-2), 198-205 (2006-02-18)
Gas chromatography with simultaneous flame-ionization detection (FID) and a nitrogen-phosphorus detection (NPD) as well as gas chromatography-mass spectrometry (GC/MS) has been used to characterize long-chain primary alkyl amines after derivatization with trifluoroacetic anhydride (TFAA). Electron impact ionization- (EI) and negative
S C Lung et al.
Chemosphere, 41(12), 1865-1871 (2000-11-04)
The effects of coating materials on polychlorinated biphenyl (PCB) adsorption in aqueous solution were assessed in an attempt to minimize PCB sorption loss during sampling processes. A coating material, which enhances PCB adsorption and allows adsorbed PCBs to be readily
Lucas H da Silva et al.
Gerodontology, 29(2), e1019-e1023 (2012-01-10)
The purpose of this study was to evaluate the flexural strength and Vickers hardness of a microwave energy heat-cured acrylic resin by adding different concentrations of silane surface-treated nanoparticle silica. Acrylic resin specimens with dimensions of 65 × 10 ×
Teemu Näykki
Analytical and bioanalytical chemistry, 372(7-8), 829-831 (2002-05-16)
The use of silylation of glassware in mercury analytics was investigated. By treating the glassware with 5% (v/v) dichlorodimethylsilane in toluene, the surfaces of the vessels were inactivated. Method development proved that silylation can extend the range of stabile, contamination-free
J M Curran et al.
Biomaterials, 32(21), 4753-4760 (2011-04-15)
Material modifications can be used to induce cell responses, in particular-CH(3) and -NH(2) have shown potential in enhancing the ability of a material to support mesenchymal stem cell (MSC) adhesion and differentiation. Currently this process is variable, due to the
Active Filters
我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系技术服务部门
