KN12A3TTT1

Opticap XLT 30" Polygard CN 1.2 um 1.5" TC/TC 1 件装

inlet connection diam. 1.5 in., pore size 1.2 μm, cartridge nominal length 30 in. (75 cm)

• 别名: Opticap^® XLT30 Polygard过滤器^®
• UNSPSC代码: 23151806
• eCl@ss: 32031690

属性

• 物料: polypropylene ; polypropylene housing; polypropylene support; polypropylene vent cap; silicone seal
• 质量水平: 400
• 管理合规性: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• 制造商/商品名称: Opticap^®
• 参数: 25 °C max. inlet temp.; 80 psig max. inlet pressure
• 纯化柱标称长度: 30 in. (75 cm)
• 入口接头直径: 1.5 in.
• 出口接头直径: 1.5 in.
• 杂质: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction); <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• 重量萃取物: ≤165 mg/capsule
• 基质: Polygard^®-CN
• 孔径: 1.2 μm nominal pore size; 1.2 μm pore size
• 输入: sample type liquid
• 配件: inlet sanitary flange; 38 mm (1 1/2 in.) inlet/outlet sanitary flange; outlet sanitary flange

说明

一般描述

Device Configuration: 取样皿滤膜

T-line/Gauge Port: T-line

特点和优势

Format: Single Layer

包装

Double Easy-Open bag

其他说明

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use

• Organism Retention: Microorganism reduction
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer installation section of OPTICAP^® XL Capsules and OPTICAP^® XLT Capsules user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

制备说明

Sterilization Method
3 autoclave cycles of 30 min @ 126 °C; not in-line steam sterilizable

分析说明

Gravimetric Extractables: after 24 hours in water at controlled room temperature

法律信息

OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany