TRD3D0042

Flexmark 7 TPU flexible 3D printing filament

signal white, diam. 1.75 mm

• 分類程式碼代碼: 12352203
• NACRES: NA.23

属性

• 環保替代產品特色: Design for Energy Efficiency; Learn more about the Principles of Green Chemistry.
• sustainability: Greener Alternative Product
• 直徑: 1.75 mm
• 重量: 500 geach
• 環保替代類別: , Enabling

说明

一般說明

We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". 3D printing eliminates plastic overproduction, allowing less storage space and less than conventional production techniques. Click here for more information.

TPU Flexible 3D Printing Filament

• TPUs are highly resistant to chemical agents, wear-proof and have good elastic comeback.
• Flexmark 7 = 70 Shore A, the most flexible, but it requires a precise calibration of the printer.
• Flexmark 8 = 80 Shore A, a good mixture of flexibility and stiffness and easier to print.
• Flexmark 9 = 90 Shore A, the stiffest of all the Flexs and lets you print as usual.

Material Properties

• Density: 1.2 g/cm3
• Hardness: 70 sh/A
• Elongation at break: 750%
• Tensile strain: 40 MPa
• Compression set at 70 °C: 35%
• Charpy Impact at 23 °C: No break
• Charpy Impact at -30 °C: No break
• Abrasion loss: 42 mm3

應用

This product can be used in material extrusion 3D printing technique.

Flexmark 7 TPU 3D Printing Parameters

• Extruder (nozzle) temperature: 225 +/-10 °C
• Bed temperature: cold to 45 °C
• Print speed: 10-20 mm/s
• Fan: 0-50 %
• Minimum nozzle diameter: 0.3 mm
• Plate materials: glass, blue tape, kapton tape, etc.

安全信息

• 儲存類別代碼: 11 - Combustible Solids
• 水污染物質分類（WGK）: WGK 3
• 閃點（°F）: Not applicable
• 閃點（°C）: Not applicable