Analytical Method: Analytical Quality Assurance, Standard for Sulfide
Reagents:
Cat.No. 109099 Iodine solution 0.05 mol I2/l 0.1 N solution
Sodium sulfide nonahydrate for analysis
Cat.No. 109147 Sodium thiosulfate solution 0.1 mol/l 0.1 N solution
Cat.No. 100716 Sulfuric acid 25% for analysis
Cat.No. 105445 Zinc iodide-starch solution for analysis
Cat.No. 116754 Water for analysis
Preparation of a stock solution:
Dissolve 7.5 g of glass-clear, if necessary washed crystals of sodium sulfide nonahydrate with distilled water in a calibrated or conformity-checked 1000-mL volumetric flask and make up to the mark with distilled water. The stock solution prepared according to this procedure has a concentration of approx. 1000 mg/l sulfide.
Precise assay of the standard solution (stock solution) for sulfide:
Place 100 mL of distilled water and 5 mL (full pipette) of sulfuric acid 25 % in a 500-mL ground-glass conical flask. To this solution add 25.0 mL (full pipette) of the sulfide stock solution of approx. 1000 mg/l and 25.0 mL (full pipette) of iodine solution 0.05 mol/l. Shake the contents of the flask thoroughly for about one minute, subsequently titrate with sodium thiosulfate solution 0.1 mol/l until the yellow iodine color has disappeared, add 1 mL of zinc iodide-starch solution, and continue to titrate until a milky, pure white color emerges.
Calculation of the exact content of the sulfide solution:
C1 = consumption of sodium thiosulfate 0.1 mol/l
C2 = quantity of iodine solution 0.05 mol/l (25.0 mL)
mg/l sulfide = (C2 - C1) x 64,13
Further investigational concentrations may be prepared from the stock solution exactly determined according to the procedure described above by diluting accordingly.
Stability:
When stored in a cool place (refrigerator), the stock solution remains stable for at most one day. The diluted investigational solutions must be used immediately.
Zaloguj się lub utwórz konto, aby kontynuować.
Nie masz konta użytkownika?