Przejdź do zawartości
Merck

An innovative ultrasound, Fe(2+) and TiO(2) photoassisted process for bisphenol A mineralization.

Water research (2010-01-29)
Ricardo A Torres-Palma, Jessica I Nieto, Evelyne Combet, Christian Pétrier, Cesar Pulgarin
ABSTRAKT

This paper explores the degradation of a model pollutant, bisphenol A, by an advanced oxidation process that combines sonolysis, Fe(2+), and TiO(2) in a photoassisted process. Experiments were done under saturated oxygen conditions. The effect of different Fe(2+) (0.56 and 5.6 mg/L) and TiO(2) (10 and 50 mg/L) concentrations was investigated on both the elimination and mineralization of the pollutant. A pronounced synergistic effect that led to the complete and rapid elimination of dissolved organic carbon (DOC) was observed even at low catalyst loadings. In this system, almost a complete removal of DOC (93%) was observed after 4 h using 10 and 5.6 mg/L of TiO(2) and Fe(2+), respectively, whereas at the same time, only 5, 6, and 22% of DOC was removed by an individual process alone (TiO(2) photocatalysis, ultrasound, and photo-Fenton, respectively). In this system, ultrasound has the principal role of eliminating the initial substrate and providing hydrogen peroxide for the photocatalytic systems, while photo-Fenton and TiO(2) photocatalysis are mainly responsible for the transformation of the intermediates in CO(2) and H(2)O. The role of H(2)O(2) generated from the sonochemical process is also discussed.

MATERIAŁY
Numer produktu
Marka
Opis produktu

Sigma-Aldrich
Iron(II) oxide, −10 mesh, ≥99.6% trace metals basis