The PTFE septum/PP cap lid is compatible with an alcohol mixture. However, information regarding the suitability of this lid for air shipment is not available. No specific recommendations can be provided regarding the best lid to use for this application.
Przejdź do
23189
EPA Vials, white polypropylene screw top hole cap, pre-cleaned and assembled
volume 40 mL, amber glass vial, O.D. × H 29 mm × 82 mm, pkg of 72 ea
Zaloguj się, aby wyświetlić ceny organizacyjne i kontraktowe.
Wybierz wielkość
Zmień widok
| Rozmiar/SKU | Dostępność | Cena netto |
|---|---|---|
72 ea | Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności | 724,00 zł |
Informacje o tej pozycji
UNSPSC Code:
41122001
NACRES:
NB.43
724,00 zł
Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności
Pomoc techniczna
Potrzebujesz pomocy? Nasz zespół doświadczonych naukowców chętnie Ci pomoże.
Pozwól nam pomócmaterial
PTFE/silicone septa (Thickness: 0.125"), amber glass vial, white polypropylene cap
feature
closure type screw top vial, closure type white polypropylene hole cap
packaging
pkg of 72 ea
O.D. × H
29 mm × 82 mm
volume
40 mL
fitting
thread for 24-414
application(s)
general analytical
General description
Each of the vials is cleaned according to US EPA Protocol B: The cleaning procedure is as follows:
1. Wash containers in hot water using laboratory grade non-phosphate detergent.
2. Rinse three times with copious amounts of tap water to remove detergent.
3. Rinse three times with ASTM Type I organic-free water.
4. Oven-dry containers.
5. Allow containers to cool to room temperature in an enclosed contaminant-free environment.
6. Cap the containers.
After being cleaned these vials are assembled with the following materials: Type 1 borosilicate glass, PTFE/silicone septa, and a polypropylene cap. The vials are available in either clear or amber glass. All of the vials are packaged with an open top cap and a tan/white PTFE/silicone septa.
The 40 mL EPA vials are supplied with a Certificate of Analysis and a package of labels to use to identify the contents of your sample. The package of vials is shrink wrapped after cleaning to make sure that the vials arrive to you as clean as possible.
1. Wash containers in hot water using laboratory grade non-phosphate detergent.
2. Rinse three times with copious amounts of tap water to remove detergent.
3. Rinse three times with ASTM Type I organic-free water.
4. Oven-dry containers.
5. Allow containers to cool to room temperature in an enclosed contaminant-free environment.
6. Cap the containers.
After being cleaned these vials are assembled with the following materials: Type 1 borosilicate glass, PTFE/silicone septa, and a polypropylene cap. The vials are available in either clear or amber glass. All of the vials are packaged with an open top cap and a tan/white PTFE/silicone septa.
The 40 mL EPA vials are supplied with a Certificate of Analysis and a package of labels to use to identify the contents of your sample. The package of vials is shrink wrapped after cleaning to make sure that the vials arrive to you as clean as possible.
Application
EPA vials has been used during solid phase microextraction (SPME) of odors in drinking water for analysis by GC/MS.
Ta strona może zawierać tekst przetłumaczony maszynowo.
1 of 1
Ta pozycja | |||
|---|---|---|---|
| description volume 40 mL, amber glass vial, O.D. × H 29 mm × 82 mm, pkg of 72 ea | description volume 4 mL, clear glass vial | description volume 7 mL, clear glass vial | description volume 7 mL, amber glass vial |
| volume 40 mL | volume 4 mL | volume 7 mL | volume 7 mL |
| fitting thread for 24-414 | fitting thread for 13-425 | fitting thread for 15-425 | fitting thread for 15-425 |
| feature closure type white polypropylene hole cap, closure type screw top vial | feature closure type black polypropylene hole cap, closure type screw top vial, precleaned | feature closure type black polypropylene hole cap, closure type screw top vial | feature closure type screw top vial, closure type black polypropylene hole cap, precleaned |
| material amber glass vial, PTFE/silicone septa (Thickness: 0.125"), white polypropylene cap | material PTFE septum face, PTFE/silicone septum (thickness: 0.060"), clear glass vial, black polypropylene cap, silicone septum body | material black polypropylene cap, silicone septum body, PTFE septum face, clear glass vial, PTFE/silicone septa (thickness: 0.060") | material PTFE/silicone septa (thickness: 0.060"), PTFE septum face, silicone septum body, amber glass vial, black polypropylene cap |
| packaging pkg of 72 ea | packaging pkg of 100 ea | packaging pkg of 100 ea | packaging pkg of 100 ea |
| O.D. × H 29 mm × 82 mm | O.D. × H - | O.D. × H - | O.D. × H - |
Still not finding the right product?
Explore all of our products under EPA Vials, white polypropylene screw top hole cap, pre-cleaned and assembled
Wybierz jedną z najnowszych wersji:
Masz już ten produkt?
Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.
-
Would these lids be compatible with a 1:1:1 mixture of methanol:ethanol:water, and if yes, would they be sufficiently secure if that solution was shipped by air, if otherwise packaged properly? Or would a non-septum lid be better?
1 answer-
Helpful?
-
-
ARE THE LIDS AND TUBES AUTOCLAVABLE?
1 answer-
Yes, the lids and tubes are autoclavable. Use only gamma radiation for autoclaving; do not use high temperatures.
Helpful?
-