Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
Przejdź do
Wybierz wielkość
| Do Państwa/SKU | Dostępność | Cena netto |
|---|---|---|
100 mL | Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności | 308,00 zł |
500 mL | Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności | 1280,00 zł |
Informacje o tej pozycji
308,00 zł
biological source
bovine (calf)
Quality Segment
sterility
sterile-filtered
form
liquid
composition
hemoglobin, ≤20 mg/mL
origin
USA origin
technique(s)
cell culture | mammalian: suitable
impurities
≤100 EU/mL endotoxin
shipped in
dry ice
storage temp.
−20°C
Application
Preparation Note
Prepared by heating at 56°C for 30 minutes.
Analysis Note
1 of 1
Ta pozycja | |||
|---|---|---|---|
| description USA origin, Heat Inactivated, sterile-filtered, suitable for cell culture | description USA origin, sterile-filtered, suitable for cell culture | description from formula-fed bovine calves, iron supplemented, USA origin, sterile-filtered, suitable for cell culture | description Iron-Fortified, USA origin, from formula-fed bovine calves, sterile-filtered, suitable for cell culture |
| origin USA origin | origin USA origin | origin USA origin | origin USA origin |
| sterility sterile-filtered | sterility sterile-filtered | sterility sterile-filtered | sterility sterile-filtered |
| technique(s) cell culture | mammalian: suitable | technique(s) cell culture | mammalian: suitable | technique(s) cell culture | mammalian: suitable | technique(s) cell culture | mammalian: suitable |
| biological source bovine (calf) | biological source bovine (calf) | biological source bovine (calf) (formula-fed) | biological source bovine (calf) (formula-fed) |
| form liquid | form liquid | form liquid | form - |
| storage temp. −20°C | storage temp. −20°C | storage temp. −20°C | storage temp. −20°C |
Still not finding the right product?
Explore all of our products under Newborn Calf Serum
Klasa składowania
10 - Combustible liquids
wgk
WGK 3
flash_point_f
Not applicable
flash_point_c
Not applicable
ppe
Eyeshields, Gloves
Wybierz jedną z najnowszych wersji:
Masz już ten produkt?
Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.
-
What is the Department of Transportation shipping information for this product?
1 answer-
Helpful?
-
-
Why is serum Heat-Inactivated (HI)?
1 answer-
Heat inactivation of serum is performed to inactivate complement (which can cause cell lysis or downstream problems in immunoassays). If there are immunoglobulins present in the serum that can bind to the cells in culture (either specifically or non-specifically), there is a chance for antibody-mediated complement cytotoxicity (ADCC, causing cell death). It may also reduce the titer of some mycoplasma and some viruses. Often, heat-inactivated serum is used because of the adoption of a previous protocol. It is mainly used when culturing hematopoetic cells or performing immunological type assays such as mixed-lymphocyte reactions or neutralization assays.FBS may not be heat inactivated as this is not required for all applications. It limits the loss of the other protein activity that may be minimally present in the serum.A protocol for heat inactivation:1. Allow serum containers to come to room temperature. Swirl bottles of serum immediately before adding to the water bath.2. A water-filled control bottles (T1) should be placed in a 56 °C water bath. Place the containers in the water bath up to the serum line. Do not completely submerge the containers. When the temperature of T1 reaches 56 °C, start the timer set for 30 minutes. Do not allow temperatures to exceed 56 °C. Higher temperatures will denature the proteins, gel the serum or alter the performance of the serum.3. Gently swirl the bottles every 5 to 10 minutes while in the water bath and check the temperature in the control bottle. It is not uncommon for plastic containers to bow slightly after heat treatment. This is not harmful to the serum.4. At the end of 30 minutes remove the serum bottles from the water bath. Aliquot the serum into smaller volumes and freeze. Sigma-Aldrich does not recommend repeated thaw-freeze cycles.
Helpful?
-



