9Z2786

Non-sterilized Millipak^® Final Fill 100 Filter Unit 0.45  µm 1 1/2  in. TC/TC

• Código UNSPSC: 23151806
• eCl@ss: 32031690

Propiedades

• Materiales: PVDF ; polysulfone ; polysulfone support
• Nivel de calidad: 400
• esterilidad: non-sterile
• Características: hydrophilic
• Parámetros: 10 psi max. differential pressure (0.7 bar) at 25 °C (Reverse); 3.0 L/min flow rate at 0.69 bar; 80 psi max. differential pressure (5.5 bar) at 25 °C (Forward); 80 psi max. inlet pressure (5.5 bar) at 25 °C
• filtración área: 500 cm²
• diám. conexión a entrada: 1 1/2 in.
• diám. conexión a salida: 1-1/2 in.
• tamaño: 100 L
• impurezas: <0.25 EU/mL Aqueous extraction (LAL test, meeting requirements of USP <85>, EP 2.6.14 and JP 4.01.)
• Matriz: Durapore^®
• tamaño de poro: 0.45 μm
• punto de burbuja: ≥26 psi (1790 mbar), air with water
• Adaptador: inlet sanitary flange; outlet sanitary flange; 38 mm (1 1/2 in.) sanitary flange drain/vent
• idoneidad: suitable for endotoxin

Descripción

Descripción general

Aqueous extraction contains < 0.25<nbsp/> EU/mL per device as determined using the Limulus Amebocyte Lysate (LAL) test, meeting requirements of USP <85>, EP 2.6.14 and JP 4.01.

Device integrity and retention was maintained after 3 autoclave cycles of 90 minutes at 126  °C. Devices can withstand a dose ? 40  kGy gamma exposure.

Envase

Double Easy-Open bag

Información legal

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany

Cláusula de descargo de responsabilidad

These products are manufactured in a facility which is certified to ISO 9001:2015 Quality Management Systems.