Saltar al contenido
Merck
Todas las fotos(3)

Documentos clave

Ver Toda la documentación

181110

Sigma-Aldrich

Nylon 6

pellets

Sinónimos:

Polycaprolactam

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(3)

About This Item

Fórmula lineal:
[-NH(CH2)5CO-]n
Número de CAS:
25038-54-4
Número MDL:
MFCD00133998
Código UNSPSC:
12162002
ID de la sustancia en PubChem:
24850915
NACRES:
NA.23

Formulario

pellets

Nivel de calidad

100

temp. de autoignición

815 °F

temperatura de transición

Tm 228.5 °C
Tg 62.5 °C

densidad

1.084 g/mL at 25 °C (lit.)

cadena SMILES

NC(=O)CCCCC

InChI

1S/C6H13NO/c1-2-3-4-5-6(7)8/h2-5H2,1H3,(H2,7,8)

Clave InChI

ALBYIUDWACNRRB-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

Categorías relacionadas

Aplicación

Nylon 6 can be used as starting material to prepare:
  • Silica nanoparticles–nylon 6 composites for extraction of hormones from aqueous samples.
  • Polymeric nanofibers by electrospinning method. These nanofibers can be used to fabricate highly efficient nanofilters.

Código de clase de almacenamiento

11 - Combustible Solids

Clase de riesgo para el agua (WGK)

WGK 3

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
MKCX0489
MKCV7974
MKCT8266
MKCS8641
MKCQ6805

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

Slide 1 of 2

1 of 2

PA-6 ≥98% (HPLC)

Sigma-Aldrich

SML2185

PA-6

Polyamide - Nylon 6 (PA 6), powder, max. particle size 50micron, weight 1000 g, min. particle size 5micron

GF52309548

Polyamide - Nylon 6

Anna Lindqvist et al.
Perception, 41(11), 1373-1391 (2012-01-01)
Twenty participants scaled similarities in odour quality, odour intensity and pleasantness/ unpleasantness of 10 binary and 5 higher-order mixtures of 5 odorous degradation products from the polymer Polyamide 6.6. The perceived odour qualities of all binary mixtures were represented well
Fei Hang et al.
Nanotechnology, 22(36), 365708-365708 (2011-08-17)
A nanomechanical testing set-up is developed by integrating an atomic force microscope (AFM) for force measurements with a scanning electron microscope (SEM) to provide imaging capabilities. Electrospun nanofibers of polyvinyl alcohol (PVA), nylon-6 and biological mineralized collagen fibrils (MCFs) from
Hem Raj Pant et al.
Journal of colloid and interface science, 364(1), 107-111 (2011-09-06)
In this work, different fractions of solvent-induced polymer degraded solution were mixed with freshly prepared solution of same polymer, and its effect on fiber morphology of electrospun mats was investigated. Nylon-6 solution in formic acid was allowed to degrade for
Giriprasath Gururajan et al.
Nanoscale, 3(8), 3300-3308 (2011-06-30)
An atomic force microscopy (AFM) probe is successfully utilized as an electrospinning tip for fabricating Nylon-6 nanofibers. The nanometre-size tip enabled controlled deposition of uniform polymeric nanofibers within a 1 cm diameter area. Nylon-6 nanofibers were continuously electrospun at a
Habib Bagheri et al.
Analytica chimica acta, 716, 34-39 (2012-01-31)
A novel solid phase microextraction (SPME) fiber was fabricated by electrospinning method in which a polymeric solution was converted to nanofibers using high voltages. A thin stainless steel wire was coated by the network of polymeric nanofibers. The polymeric nanofiber
Ver todos los artículos relacionados

Artículos

Electrospinning: Enabling Nanostructured Materials

Electrospinning technique applications discussed, emphasizing control of nanofibers and assembly into 3D architectures.

Electrospinning: Enabling Nanostructured Materials

Electrospinning technique applications discussed, emphasizing control of nanofibers and assembly into 3D architectures.

Electrospinning: Enabling Nanostructured Materials

Electrospinning technique applications discussed, emphasizing control of nanofibers and assembly into 3D architectures.

Electrospinning: Enabling Nanostructured Materials

Electrospinning technique applications discussed, emphasizing control of nanofibers and assembly into 3D architectures.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico