10358
Amberlite™ XAD4
20-60 mesh
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
About This Item
Productos recomendados
form
solid
autoignition temp.
800 °F
packaging
pkg of 500 g
technique(s)
HPLC: suitable
LPLC: suitable
surface area
750 m2/g
matrix
styrene-divinylbenzene
matrix active group
polymer
particle size
20-60 mesh
pore size
~0.98 mL/g pore volume
100 Å mean pore size
density
1.02 g/mL (true wet)(lit.)
1.08 g/mL (skeletal)(lit.)
separation technique
reversed phase
¿Está buscando productos similares? Visita Guía de comparación de productos
Categorías relacionadas
General description
Amberlite XAD4, a nonpolar absorbent, used for stripping and concentration of organic compounds. It is also used in developing chelating ligands due to its properties like, porosity, high surface area, purity and durability.
Resinas no iónicas macrorreticulares que adsorben y liberan especies iónicas a través de interacciones hidrófobas y polares. Normalmente se usan en condiciones isocráticas.
Application
Compuestos pequeños hidrófobos; tensoactivos; fabricación farmacéutica; fenol, compuestos orgánicos clorados, eliminación y recuperación de plaguicidas; eliminación orgánica de agua para el consumo.
Amberlite™ XAD4 was used:
- in rapid fractionation technique
- as sorbent for HPLC analysis
Other Notes
Two mesh sizes are available:
Mesh 20-60 are Cat. No. 20276, 10358, XAD4
Mesh 20-50 is Cat. No. 06444
Mesh 20-60 are Cat. No. 20276, 10358, XAD4
Mesh 20-50 is Cat. No. 06444
Legal Information
Amberlite is a trademark of DuPont de Nemours, Inc.
Storage Class
11 - Combustible Solids
wgk_germany
WGK 3
flash_point_f
Not applicable
flash_point_c
Not applicable
ppe
Eyeshields, Gloves, type N95 (US)
Choose from one of the most recent versions:
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
Characterization and applications of Amberlite XAD-4 in preparative liquid chromatography
Pietrzyk, D. J., and J. D. Stodola
Analytical Chemistry, 53, 1822-1828 (1981)
Passively capturing air data on more volatile chemicals.
Kellyn Betts
Environmental science & technology, 43(4), 978-978 (2009-03-27)
Antoine P Trzcinski et al.
Journal of environmental science and health. Part A, Toxic/hazardous substances & environmental engineering, 46(13), 1539-1548 (2011-10-14)
In this study, various methods were compared to reduce the Chemical Oxygen Demand (COD) content of stabilised leachate from a Submerged Anaerobic Membrane Bioreactor (SAMBR). It was found that Powdered Activated Carbon (PAC) resulted in greater COD removals (84 %)
Corjan van den Berg et al.
Biotechnology and bioengineering, 100(3), 466-472 (2008-04-29)
The sustainable production of fine/bulk chemicals is often hampered by product toxicity and inhibition to the producing micro-organisms. Consequently, the product must be removed from the micro-organisms' environment. To achieve this, so-called solvent-impregnated resins (SIRs) as well as commercial resins
Chao Huang et al.
New biotechnology, 29(3), 372-378 (2011-04-05)
Oleaginous yeast Trichosporon fermentans was proved to be able to use sulphuric acid-treated sugar cane bagasse hydrolysate as substrate to grow and accumulate lipid. Activated charcoal was shown as effective as the more expensive resin Amberlite XAD-4 for removing the
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico