CTGR01TP1

Aervent^® 0.2 µm小柱

pore size 0.2 μm, cartridge nominal length 10 in. (25 cm), Code 0

• 别名: Aervent CTGR Cartridge Filter 10 in. 0.2 µm Code 0
• 分類程式碼代碼: 23151806
• eCl@ss: 32031690

属性

• 材料: PTFE ; polypropylene ; polypropylene support; silicone seal
• 品質等級: 400
• 無菌: non-sterile
• 滅菌相容性: steam-in-place compatible
• 產品線: Aervent^®
• 特點: hydrophobic
• 製造商／商標名: Aervent^®
• 參數: ≤24 mL/min nitrogen diffusion at 970 mbar (14 psig) and 23 °C (in 70/30% IPA/water); 1.7 bar max. inlet pressure (25 psi) at 80 °C; 1.8 bar max. differential pressure (25 psid) at 80 °C (Forward); 4.1 bar max. differential pressure (60 psid) (Reverse; intermittent); 4.1 bar max. inlet pressure (60 psi) (Reverse; Intermittent); 5.5 bar max. differential pressure (80 psid) at 25 °C (Forward); 5.5 bar max. inlet pressure (80 psi) at 25 °C (Forward)
• 技術: gas filtration: suitable
• 長度: 10 in.
• 寬度: 2.7 in.
• 柱標稱長度: 10 in. (25 cm)
• 直徑: 6.9 cm (2.7 in.)
• 過濾面積: 0.65 m²
• 雜質: <0.25 EU/mL USP bacterial endotoxins (LAL test, aqueous extraction)
• 重量法萃取物: ≤35 mg/cartridge
• 基質: Aervent^®
• 孔徑: 0.2 μm pore size
• 輸入: sample type gas
• 起泡點: ≥1100 mbar (16 psig), nitrogen with 70/30% IPA/water at 23 °C
• 柱代碼: Code 0

说明

一般說明

Device Configuration: Cartridge

特點和優勢

Rated for aerosol retention of a total challenge of 108–1010 plaque forming units of ΦX-174 virus particles at 85 Nm3/h (50 SCFM) per cartridge.

包裝

Double Easy-Open bag

品質

Retains Brevundimonas diminuta liquid aerosol for 21 days at a minimum challenge of 10⁷ CFU/cm²

準備報告

Sterilization Method
150 (100 forward/50 reverse) SIP cycles of 30 min @ 145 °C

This product was manufactured with a PTFE membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

分析報告

Bacterial Retention
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM^® F838 methodology.

HydroCorr: ≤0.75 mL/min @ 2.6 bar (38 psig) per 10 in cartridge

Gravimetric Extractables: after 24 hours in a 70/30% IPA/water mixture at controlled room temperature

其他說明

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer Steam Sterilization & Integrity Testing Procedures guide and first page of Visual Inspection Guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

法律資訊

AERVENT is a registered trademark of Merck KGaA, Darmstadt, Germany

ASTM is a registered trademark of American Society for Testing and Materials