It is possible that either too much glacial acetic acid was added, or the acetic acid was added too quickly. When using the 0.5% Eosin Y solution sold as catalog number HT110216-500 ml, the instructions recommend adding 0.5 glacial acetic acid slowly to 100 ml of stain solution just prior to use. It's not uncommon to observe this in the lab. In most cases, the precipitate can be resolved by swirling the solution by hand or mixing it on a stir plate.
추천 제품
양식
liquid
Quality Level
농도
5 wt. % in H2O
색상
red to very dark red
density
1.015 g/mL at 25 °C
λmax
518 nm
응용 분야
diagnostic assay manufacturing
hematology
histology
저장 온도
room temp
SMILES string
[Na+].[Na+].[O-]C(=O)c1ccccc1C2=C3C=C(Br)C(=O)C(Br)=C3Oc4c(Br)c([O-])c(Br)cc24
InChI
1S/C20H8Br4O5.2Na/c21-11-5-9-13(7-3-1-2-4-8(7)20(27)28)10-6-12(22)17(26)15(24)19(10)29-18(9)14(23)16(11)25;;/h1-6,25H,(H,27,28);;/q;2*+1/p-2
InChI key
SEACYXSIPDVVMV-UHFFFAOYSA-L
유사한 제품을 찾으십니까? 방문 제품 비교 안내
일반 설명
애플리케이션
신호어
Warning
유해 및 위험 성명서
Hazard Classifications
Skin Sens. 1
Storage Class Code
12 - Non Combustible Liquids
WGK
WGK 3
Flash Point (°F)
Not applicable
Flash Point (°C)
Not applicable
-
a 1% Eosin Y solution in water using the product under the catalog number 318906 (Eosin Y solution 5wt% in water) was created and then diluted to 1% in water, the pH was lowered with acetic acid, but it immediately changed to a bright red color and produced a precipitate?
1 답변-
도움이 되었습니까?
-
-
Is Product 318906 suitable for use in Hematoxylin and Eosin (H&E) staining procedures?
1 답변-
Product 318906 was not intended for use with H&E staining techniques. The dye content for the Eosin Y is 5% in water. For H&E staining, the concentration is typically 0.5 to 1.0 %. At 5 % dye content, the dye is much too concentrated for use with H&E staining. If used at such a high concentration, the cytoplasmic staining is likely to obscure the nuclear staining from the hematoxylin. A well stained H&E slide should show blue nuclear staining and typically at least 3 shades of Eosin staining. When used at 5% dye content, the cytoplasmic staining is likely to be a homogenous or monotone.The 5% Eosin solution has only one common application - determining sperm viability. In a typical semen analysis, 5% Eosin Y is used in conjunction with 10% Nigrosin. This combination of dyes is used to judge the viability of the sperm. A standard H&E procedure is then used to judge the morphology of the sperm. Sperm counts are typically performed without the use of a dye solution.It is possible to consider a 5% Eosin solution as a 10X staining solution. The product, however, is not suitability tested for use in either a sperm viability procedure or a H&E staining procedure.The following products have been suitability tested for use in H&E staining procedures and are considered suitable for use in In Vitro Diagnostic procedures. They are the preferred products for H&E staining. Most are formulated with 0.5% Eosin Y. The exception is Eosin Y with Phloxine B. For this formulation both the Eosin Y and the Phloxine B are formulated at 0.1% dye content.Eosin Y solution, alcoholicHT110116, HT110132, HT110180, HT1101128Eosin Y solution, aqueousHT110216, HT110232, HT110280, HT1102128Eosin Y solution, alcoholic, with phloxineHT110316, HT110332, HT110380, HT1103128
도움이 되었습니까?
-
-
What is the Department of Transportation shipping information for this product?
1 답변-
Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
도움이 되었습니까?
-
활성 필터
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.